DM v3
makizusi·-circuit·DD_v3/DM_v3.kicad_pcb
About the DM v3 PCB
DM v3 is an open source STM32 PCB design by makizusi, published on GitHub. It is a 2-layer board measuring 98 × 98 mm, with 57 components from 34 distinct parts.
Its main chip is the STM32F446RETX, from the STM32 family. Other key parts include the MCP2551-I-SN, LP2950-3.3_TO252, TLP627, SPX3819M5-L and STM32F446RCT7. By type, the board carries 12 resistors, 11 capacitors, 10 ICs, 5 connectors, 3 LEDs and 2 switches.
From the project
作成した回路
https://github.com/makizusi/-circuit/blob/main/%E8%A8%AD%E8%A8%88%E6%84%8F%E5%9B%B3.pdf
Main components on the DM v3
DM v3 bill of materials (BOM)
57 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F446RETX TLP627 | DIP-4_W7.62mm | U1 |
| 2 | MCP2551-I-SN TLP627 | DIP-4_W7.62mm | U2, U3 |
| 1 | LP2950-3.3_TO252 TLP627 | DIP-4_W7.62mm | U4 |
| 4 | TLP627 | DIP-4_W7.62mm | U5, U6, U7, U8 |
| 1 | SPX3819M5-L | SOT-23-5 | U9 |
| 1 | STM32F446RCT7 | QFP50P1200X1200X160-64N | U10 |
| 1 | ABM3B-8.000MHZ-B2-T | Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm | Q1 |
| 1 | USB_A | USB_A_Molex_67643_Horizontal | J9 |
| 1 | USB_B | USB_B_Lumberg_2411_02_Horizontal | J10 |
| 1 | stlink | JST_XA_S05B-XASK-1_1x05_P2.50mm_Horizontal | J11 |
| 1 | Conn_01x04 | JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical | J12 |
| 1 | CAN1 Conn_01x04 | JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical | J13 |
| 10 | Conn_01x02 | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | DN1, DN2, DN3, DN4, DN5, DN6, DN7, DN8 +2 |
| 1 | SKRPACE010 | SMT_4.2X3.2_ | S1 |
| 1 | KHS42E | NE555DR | S2 |
| 2 | power | AMASS_XT60PW-M_1x02_P7.20mm_Horizontal | XT60IN1, XT60IN2 |
| 1 | vcc | LED_0603_1608Metric | LED1 |
| 1 | 5v | LED_0603_1608Metric | LED2 |
| 1 | 3.3v | LED_0603_1608Metric | LED3 |
| 1 | BAT60JFILM | D_SOD-323 | D1 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1UF 330μf | CP_Elec_10x10 | C1 |
| 1 | 1UF 4.7nF | C_0603_1608Metric | C2 |
| 1 | 1UF 2.2uF | C_0603_1608Metric | C3 |
| 2 | 1UF 22pF | C_0603_1608Metric | C4, C5 |
| 1 | 1UF 0.1uF | C_0603_1608Metric | C6 |
| 1 | 47U 4.7uF | C_0603_1608Metric | C7 |
| 2 | 0.1U 0.1uF | C_0603_1608Metric | C8, C10 |
| 1 | 47U 0.1uF | C_0603_1608Metric | C9 |
| 1 | 0.1uF | C_0603_1608Metric | C11 |
| 6 | 100 | R_0603_1608Metric | R1, R2, R3, R6, R7, R8 |
| 2 | 120 100 | R_0603_1608Metric | R4, R5 |
| 2 | 4.7k | R_0603_1608Metric | R9, R10 |
| 1 | 1k | R_0603_1608Metric | R11 |
| 1 | 10k | R_0603_1608Metric | R12 |
DM v3 design files
The KiCad project lives in the makizusi/-circuit repository on GitHub; these links point at the commit this page was built from.
DM v3: common questions
What microcontroller does the DM v3 use?
The DM v3 is built around the STM32F446RETX, from the STM32 family.
How big is the DM v3 PCB?
The DM v3 measures 98 × 98 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DM v3?
57 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DM v3 design files?
From the makizusi/-circuit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DM v3 design in my own project?
The repository has no license, so all rights stay with makizusi. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the DM v3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in -circuit
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k