Esp32-gps tracker
MaksymKutyshenko·esp32-gps-tracker·hardware/kicad/gps_tracker.kicad_sch
About the Esp32-gps tracker PCB
Esp32-gps tracker is an open source ESP32 PCB design by MaksymKutyshenko, published on GitHub. It is a board, with 14 components from 13 distinct parts.
Its main chip is the ESP32-S3-WROOM-1 (DevKitC-1), from the ESP32 family. By type, the board carries 6 connectors, 4 resistors, 1 IC, 1 switch, 1 LED and 1 capacitor.
It belongs with the rf & radio, dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
ESP32-S3 GPS tracker on ESP-IDF/FreeRTOS: GNSS, MicroSD track log, GPRS uplink, deep sleep; plus its own live-map web app (Fastify, Postgres, React, Leaflet).
Component roles, power tree, GPIO map and the wiring risks for the GPS tracker. Pin numbers here are the single source for firmware/include/config.hpp; change them together.
Schematic: kicad/gpstracker.kicadsch (PDF), generated from this pin map by tools/genschematic.py`. Breakout modules are drawn as pin headers with their pin meaning in a note next to each; edit the script, not the file, when a pin changes.
Main components on the Esp32-gps tracker
Esp32-gps tracker bill of materials (BOM)
14 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1 (DevKitC-1) | U1 | |
| 1 | GNSS: Foxeer M10Q-250 / Beitian BE-220 | J1 | |
| 1 | BIGGA GSM (SIM800C) board | J2 | |
| 1 | SSD1306 0.96" OLED I2C 0x3C | J3 | |
| 1 | MicroSD SPI module | J4 | |
| 1 | Battery Shield V8, 2x18650 | J5 | |
| 1 | BMA400 CJMCU-400 | J6 | |
| 1 | Button (BOOT-style, active low) | SW1 | |
| 1 | red NET | LED1 | |
| 1 | 1000u | C1 | |
| 2 | 100k | R1, R2 | |
| 1 | 6.8k | R3 | |
| 1 | 1k | R4 |
Esp32-gps tracker design files
The KiCad project lives in the MaksymKutyshenko/esp32-gps-tracker repository on GitHub; these links point at the commit this page was built from.
- Schematichardware/kicad/gps_tracker.kicad_sch
Esp32-gps tracker: common questions
What microcontroller does the Esp32-gps tracker use?
The Esp32-gps tracker is built around the ESP32-S3-WROOM-1 (DevKitC-1), from the ESP32 family.
How many components are on the Esp32-gps tracker?
14 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-gps tracker design files?
From the MaksymKutyshenko/esp32-gps-tracker repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Esp32-gps tracker design in my own project?
The repository has no license, so all rights stay with MaksymKutyshenko. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32-gps tracker without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k