AQUAPULSE
Mamata092008·AQUAPULSE·hardware/kicad/AQUAPULSE_Node.kicad_pcb
About the AQUAPULSE PCB
AQUAPULSE is an open source ESP32 PCB design by Mamata092008, published on GitHub. It is a 2-layer board measuring 75 × 55 mm, with 1 components from 1 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
It belongs with the sensors designs in this gallery.
From the project
AQUAPULSE: Non-invasive, clamp-on acoustic sensor mesh (ESP32-S3) that pinpoints water pipeline leaks in real time using cross-correlation triangulation.
SDG Alignment: SDG 6 (Clean Water & Sanitation), SDG 11 (Sustainable Cities & Communities), SDG 13 (Climate Action) ANRF Priority Alignment: Smart Cities, Environmental & Water Technologies, Urban Infrastructure Team: TECHTONICS | Stage: Stage 1 Hardware Innovation Proposal & Prototype Engineering
Urban water utilities across India experience catastrophic Non-Revenue Water (NRW) losses averaging between 39% and 50%, with metropolitan utilities like the Delhi Jal Board and Kerala Water Authority losing up to 50–60% of pumped drinking water to undetected subterranean pipeline fissures and…

Main components on the AQUAPULSE
AQUAPULSE bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8R8 Dual-Core Xtensa LX7 MCU, 240MHz, 8MB Flash, 8MB PSRAM, Wi-Fi 4 / BLE 5 Espressif | U1 |
AQUAPULSE design files
The KiCad project lives in the Mamata092008/AQUAPULSE repository on GitHub; these links point at the commit this page was built from.
AQUAPULSE: common questions
What microcontroller does the AQUAPULSE use?
The AQUAPULSE is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How big is the AQUAPULSE PCB?
The AQUAPULSE measures 75 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AQUAPULSE?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AQUAPULSE design files?
From the Mamata092008/AQUAPULSE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AQUAPULSE design in my own project?
The repository has no license, so all rights stay with Mamata092008. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the AQUAPULSE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k