ArcadeStick

Marc-Blanco·ArcadeStick·mikupcb/Badmiku.kicad_pcb

About the ArcadeStick PCB

ArcadeStick is an open source RP2040/RP2350 PCB design by Marc-Blanco, published on GitHub under the MIT license. It is a 2-layer board measuring 187.5 × 71.8 mm, with 8 components from 6 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. By type, the board carries 3 connectors, 3 switches, 1 IC and 1 LED.

It belongs with the displays & leds designs in this gallery.

From the project

A simple but functional Fightstick.

SLAGCOIN: they also have other designs that you could use

ArcadeStick, from the project README — From the project README

Main components on the ArcadeStick

RP2040

ArcadeStick bill of materials (BOM)

8 components, 6 distinct parts.

Qty	Part	Footprint	Refs
1	RP2040	RaspberryPi_Pico_Common_THT	U1
1	Conn_01x04_Pin	Hirose_DF13-04P-1.25DSA_1x04_P1.25mm_Vertical	J1
1	Conn_01x01_Pin	PinHeader_1x01_P1.00mm_Vertical	J2
1	Conn_01x08_Pin	PinHeader_1x08_P1.00mm_Horizontal	J3
3	SW_Push	SW_PUSH_6mm	SW1, SW2, SW3
1	OLED-128O064D	OLED-128O064D	DS1

ArcadeStick design files

The KiCad project lives in the Marc-Blanco/ArcadeStick repository on GitHub; these links point at the commit this page was built from.

Layoutmikupcb/Badmiku.kicad_pcb
Schematicmikupcb/Badmiku.kicad_sch

ArcadeStick: common questions

What microcontroller does the ArcadeStick use?

The ArcadeStick is built around the RP2040, from the RP2040/RP2350 family.

How big is the ArcadeStick PCB?

The ArcadeStick measures 187.5 × 71.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ArcadeStick?

8 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the ArcadeStick design files?

From the Marc-Blanco/ArcadeStick repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ArcadeStick design in my own project?

Yes, under the terms of its MIT license, which Marc-Blanco chose for the repository.

Can I test firmware for the ArcadeStick without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.