Pseudo metal zone
marciosouzajunior·pseudo-metal-zone·hardware/PseudoMetalZone_V1.kicad_pcb
About the Pseudo metal zone PCB
Pseudo metal zone is an open source PCB design by marciosouzajunior, published on GitHub. It is a 2-layer board measuring 62.7 × 61.8 mm, with 12 components from 5 distinct parts.
Other key parts include the RC4558.
It belongs with the audio designs in this gallery.
From the project
Pedal de distorção/fuzz pesado baseado em RC4558/JRC4558, desenvolvido em protoboard e depois convertido para PCB V1 em KiCad.
Pedal de distorção/fuzz pesado baseado em RC4558/JRC4558, desenvolvido em protoboard e depois convertido para PCB V1 em KiCad.
A ideia é chegar em uma distorção agressiva para baixo/guitarra, inspirada de forma conceitual no Boss Metal Zone e em timbres de hard rock/nu metal, mas com um circuito simples, compreendido estágio por estágio, usando componentes THT e um único CI dual op-amp.
Main components on the Pseudo metal zone
Pseudo metal zone bill of materials (BOM)
12 components, 5 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC4558 | DIP-8_W7.62mm | U1 |
| 7 | Conn_01x01 | PinHeader_1x01_P2.54mm_Vertical | 9V_PAD, JMP_9V_A, JMP_9V_B, STAGE1_OUT_PAD, STAGE2_IN_PAD, VREF_PAD1, VREF_PAD2 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_STAGE1_GAIN, R_STAGE2_BIAS |
| 1 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_STAGE1_REF |
| 1 | 22K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R_STAGE2_REF |
Pseudo metal zone design files
The KiCad project lives in the marciosouzajunior/pseudo-metal-zone repository on GitHub; these links point at the commit this page was built from.
Pseudo metal zone: common questions
How big is the Pseudo metal zone PCB?
The Pseudo metal zone measures 62.7 × 61.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pseudo metal zone?
12 components, from 5 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pseudo metal zone design files?
From the marciosouzajunior/pseudo-metal-zone repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pseudo metal zone design in my own project?
The repository has no license, so all rights stay with marciosouzajunior. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687