HardLabs

Untitled

MarianAbebe·CubeSat-Power-Regulation-Health-Monitoring-Board·Untitled/Untitled.kicad_pcb

Untitled PCB layout, top view — open source board by MarianAbebe

About the Untitled PCB

Untitled is an open source PCB design by MarianAbebe, published on GitHub. It is a 4-layer board measuring 54.9 × 39.8 mm, with 47 components from 23 distinct parts.

Other key parts include the TPS62130 and INA219AxD. By type, the board carries 21 resistors, 11 capacitors, 4 ICs, 4 diodes, 2 connectors and 2 inductors.

It belongs with the science & space and test & measurement designs in this gallery.

From the project

Embedded power regulation PCB with telemetry, health monitoring, and fault detection for CubeSat electrical power systems.

The CubeSat Power Management System (CPMS) is a custom electrical power subsystem (EPS) development board inspired by CubeSat power architectures. Its purpose is to design, manufacture, and validate a professional-grade power-regulation and health-monitoring PCB using an engineering process representative of aerospace hardware development.

Unlike PCB projects focused only on schematic capture and layout, CPMS covers the complete engineering lifecycle: requirements definition, system architecture, component selection, design analysis, verification planning, hardware bring-up, firmware…

Main components on the Untitled

TPS62130INA219AxD

Untitled bill of materials (BOM)

47 components, 23 distinct parts.

QtyPartRefs
2
TPS62130
U1, U2
2
INA219AxD
U3, U4
1
Q_PMOS_GSD
Q1
1
Screw_Terminal_01x02
J1
1
Conn_01x10_Pin
J2
1
Polyfuse
F1
1
Thermistor_NTC
TH1
1
1.5KExxA
D1
3
LED
D2, D3, D4
2
2.2uH
L1, L2
3
22uF
C1, C8, C9
2
3.5nF
C2, C7
5
0.1uF
C3, C6, C10, C11, C12
1
10uF
C4
5
100k
R1, R2, R4, R6, R7
3
20k
R3, R16, R18
1
316k
R5
2
4.7k
R9, R22
3
2.2k
R10, R11, R12
1
39k
R13
Show 3 more
QtyPartRefs
4
10k
R14, R15, R17, R21
1
10m
R19
1
20m
R20

Untitled design files

The KiCad project lives in the MarianAbebe/CubeSat-Power-Regulation-Health-Monitoring-Board repository on GitHub; these links point at the commit this page was built from.

Untitled: common questions

How big is the Untitled PCB?

The Untitled measures 54.9 × 39.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Untitled?

47 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the Untitled design files?

From the MarianAbebe/CubeSat-Power-Regulation-Health-Monitoring-Board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Untitled design in my own project?

The repository has no license, so all rights stay with MarianAbebe. Use it as a reference, and ask the author before reusing the design.

More boards in CubeSat-Power-Regulation-Health-Monitoring-Board

Similar boards