4 open source boards using the TPS62130
Real designs built with the TPS62130, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Nest mini drop in
iMike78
74.5 × 70.6 mm243 parts4LCERN-OHL-S-2.0598
PICQI Charger
drewsum
150 × 50 mm293 parts2LNo license20
PICVFD Clock
200 × 50 mm458 parts2LNo license1
STM32Okgo2mini
cuspaceflight
67.4 × 39.8 mm43 parts2LNo license3
The TPS62130 in open source designs
The gallery holds 4 open source boards using the TPS62130 from 4 GitHub repositories; a typical one measures about 112.3 × 50 mm and carries around 268 components.
75% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Nest mini drop in pcb by iMike78.
Parts used alongside the TPS62130
What boards using the TPS62130 are built for
TPS62130: common questions
Where can I find a TPS62130 reference design?
Each of the 4 boards on this page is a real design using the TPS62130. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TPS62130?
The FT234XD, ISO7321C, LTC4365DDB and TPD3S014DBVR appear in the most repositories here.
Which microcontrollers do boards using the TPS62130 use?
Most are built on PIC (2), ESP32 (1) and STM32 (1).
How big is a typical board using the TPS62130?
The median is 112.3 × 50 mm, and 75% are two-layer designs.
What is the most popular open source board using the TPS62130?
By GitHub stars, Nest mini drop in pcb by iMike78, with 598 stars.
Can I simulate one of these boards using the TPS62130 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.