Bt radio manager
marianobilli·bluetooth-radio-manager·hardware/kicad/bt_radio_manager.kicad_pcb
About the Bt radio manager PCB
Bt radio manager is an open source ESP32 PCB design by marianobilli, published on GitHub. It is a 2-layer board measuring 96.5 × 73.2 mm, with 28 components from 13 distinct parts.
Its main chip is the YD-ESP32-23, from the ESP32 family. Other key parts include the LD1117V33. By type, the board carries 12 capacitors, 4 modules, 4 jumpers, 3 connectors, 3 diodes and 2 ICs.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
A self-contained, battery-powered box that puts four 2.4 GHz radios under one ESP32-S3, with a small OLED and encoder UI, in a 3D-printed case. Each radio slot takes an nRF24L01+PA+LNA or an Ebyte E01-2G4M27D, and the firmware decides what the four radios do: range tests, multi-c
A self-contained, battery-powered box that puts four 2.4 GHz radios under one ESP32-S3, with a small OLED and encoder UI, in a 3D-printed case. Each radio slot takes an nRF24L01+PA+LNA or an Ebyte E01-2G4M27D, and the firmware decides what the four radios do: range tests, multi-channel sniffing, relays, mesh experiments, or anything else that needs several 2.4 GHz radios in one hand-held unit.

Main components on the Bt radio manager
Bt radio manager bill of materials (BOM)
28 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | YD-ESP32-23 | YD-ESP32-23 | U1 |
| 1 | LD1117V33 | TO-220-3_Horizontal_TabDown | U2 |
| 4 | nRF24/E01-2G4M27D | nRF24_module_2x4 | M1, M2, M3, M4 |
| 1 | UI module | UI_module_OLED_EC11 | J1 |
| 1 | USB-C PWR A | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | USB-C PWR B | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 4 | VRF 5V|3V3 | PinHeader_1x03_P2.54mm_Vertical | JP1, JP2, JP3, JP4 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 2 | SB240 | D_DO-15_P10.16mm_Horizontal | D2, D3 |
| 2 | 470uF/10V | CP_Radial_D8.0mm_P3.50mm | C1, C2 |
| 4 | 220uF/10V | CP_Radial_D6.3mm_P2.50mm | C3, C4, C5, C6 |
| 4 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C7, C8, C9, C10 |
| 2 | 10uF/16V | CP_Radial_D5.0mm_P2.00mm | C11, C12 |
Bt radio manager design files
The KiCad project lives in the marianobilli/bluetooth-radio-manager repository on GitHub; these links point at the commit this page was built from.
Bt radio manager: common questions
What microcontroller does the Bt radio manager use?
The Bt radio manager is built around the YD-ESP32-23, from the ESP32 family.
How big is the Bt radio manager PCB?
The Bt radio manager measures 96.5 × 73.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Bt radio manager?
28 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Bt radio manager design files?
From the marianobilli/bluetooth-radio-manager repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Bt radio manager design in my own project?
The repository has no license, so all rights stay with marianobilli. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Bt radio manager without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in bluetooth-radio-manager
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k