Bt radio manager e01

marianobilli·bluetooth-radio-manager·hardware/kicad/bt_radio_manager_e01.kicad_pcb

Bt radio manager e01 PCB layout, top view — open source ESP32 board by marianobilli

About the Bt radio manager e01 PCB

Bt radio manager e01 is an open source ESP32 PCB design by marianobilli, published on GitHub. It is a 2-layer board measuring 96.5 × 73.2 mm, with 28 components from 13 distinct parts.

Its main chip is the YD-ESP32-23, from the ESP32 family. Other key parts include the LD1117V33. By type, the board carries 12 capacitors, 4 modules, 4 jumpers, 3 connectors, 3 diodes and 2 ICs.

It belongs with the rf & radio and iot & wireless designs in this gallery.

From the project

A self-contained, battery-powered box that puts four 2.4 GHz radios under one ESP32-S3, with a small OLED and encoder UI, in a 3D-printed case. Each radio slot takes an nRF24L01+PA+LNA or an Ebyte E01-2G4M27D, and the firmware decides what the four radios do: range tests, multi-c

A self-contained, battery-powered box that puts four 2.4 GHz radios under one ESP32-S3, with a small OLED and encoder UI, in a 3D-printed case. Each radio slot takes an nRF24L01+PA+LNA or an Ebyte E01-2G4M27D, and the firmware decides what the four radios do: range tests, multi-channel sniffing, relays, mesh experiments, or anything else that needs several 2.4 GHz radios in one hand-held unit.

Bt radio manager e01, from the project README
From the project README

Main components on the Bt radio manager e01

Bt radio manager e01 bill of materials (BOM)

28 components, 13 distinct parts.

QtyPartRefs
1
YD-ESP32-23
U1
1
LD1117V33
U2
4
E01-2G4M27D
M1, M2, M3, M4
1
UI module
J1
1
USB-C PWR A
J2
1
USB-C PWR B
J3
4
VRF 5V|3V3
JP1, JP2, JP3, JP4
1
1N5819
D1
2
SB240
D2, D3
2
470uF/10V
C1, C2
4
220uF/10V
C3, C4, C5, C6
4
100nF
C7, C8, C9, C10
2
10uF/16V
C11, C12

Bt radio manager e01 design files

The KiCad project lives in the marianobilli/bluetooth-radio-manager repository on GitHub; these links point at the commit this page was built from.

Bt radio manager e01: common questions

What microcontroller does the Bt radio manager e01 use?

The Bt radio manager e01 is built around the YD-ESP32-23, from the ESP32 family.

How big is the Bt radio manager e01 PCB?

The Bt radio manager e01 measures 96.5 × 73.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Bt radio manager e01?

28 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Bt radio manager e01 design files?

From the marianobilli/bluetooth-radio-manager repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Bt radio manager e01 design in my own project?

The repository has no license, so all rights stay with marianobilli. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Bt radio manager e01 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in bluetooth-radio-manager

Similar boards