HardLabs

NotMalenki

MarkR42·malenki-nano·hardware/notmalenki/notmalenki.kicad_pcb

NotMalenki PCB layout, top view — open source AVR/Arduino board by MarkR42

About the NotMalenki PCB

NotMalenki is an open source AVR/Arduino PCB design by MarkR42, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 25 × 40 mm, with 46 components from 26 distinct parts.

Its main chip is the ATtiny1616-MNR, from the AVR/Arduino family. Other key parts include the A71X05AQFI/Q, AP2205-33Y-13 and DRV8243HQRXYRQ1. By type, the board carries 22 capacitors, 13 resistors, 5 ICs, 3 inductors, 2 diodes and 1 crystal.

It belongs with the robotics & motion designs in this gallery.

From the project

Speed controller and receiver for small robots

Production hardware is in malenki-nanoi/

Main components on the NotMalenki

A71X05AQFI/QAP2205-33Y-13ATtiny1616-MNRDRV8243HQRXYRQ1

NotMalenki bill of materials (BOM)

46 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
A71X05AQFI/Q
A7105
AMICCOM
U1
1
AP2205-33Y-13
Diodes
U2
1
ATtiny1616-MNR
ATTiny1616-MNR
MICROCHIP
U3
2
DRV8243HQRXYRQ1
TI
U4, U5
1
Q24FA20H0051200
16mhz Seiko Epson Q24FA20H0051200
Seiko Epson
Y1
1
19-217/BHC-ZL1M2RY/3T
LED Blue
Everlight
D1
1
KT-0603R
LED Red
Hubei KENTO
D2
1
2.7NH
2.7nH
Sunlord
L1
1
LQW15AN4N7D10D
4.7nH
Murata
L2
1
VHF160808H4N7ST
4.7nH
Murata
L3
4
CL31A226KAHNNNE
22uF 25V
Samsung Electro-Mechanics
C1, C5, C6, C7
2
1uF 25V
Samsung
C2, C3
7
100NF
100nF
Samsung
C4, C12, C13, C16, C17, C22, C23
1
CL31A226KAHNNNE
1pF
Guangdong Fenghua Advanced
C9
1
CL31A226KAHNNNE
22pF
Guangdong Fenghua Advanced
C10
3
CL05C100JB5NNNC
10pF
Samsung
C11, C14, C15
1
CL05C561JB5NNNC
560pF
Samsung
C18
1
CL05B103KB5NNNC
10nF
Samsung
C19
2
CL05A225MQ5NSNC
2.2uF
Samsung
C20, C21
3
470R
Uniroyal
R1, R5, R6
Show 6 more
QtyPartRefs
1
1k
Uniroyal
R2
1
100K
100k
R3
3
10K
10k
Uniroyal
R4, R7, R8
2
560R
R9, R10
2
47k
R11, R12
1
0402WGF2000TCE
200R
Uniroyal
R25

NotMalenki design files

The KiCad project lives in the MarkR42/malenki-nano repository on GitHub; these links point at the commit this page was built from.

NotMalenki: common questions

What microcontroller does the NotMalenki use?

The NotMalenki is built around the ATtiny1616-MNR, from the AVR/Arduino family.

How big is the NotMalenki PCB?

The NotMalenki measures 25 × 40 mm, has 4 copper layers and is 1.59 mm thick.

How many components are on the NotMalenki?

46 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the NotMalenki design files?

From the MarkR42/malenki-nano repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the NotMalenki design in my own project?

Yes, under the terms of its GPL-3.0 license, which MarkR42 chose for the repository.

Can I test firmware for the NotMalenki without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in malenki-nano

Similar boards