Td2 solar

martincrespo77·Paneles-solares-pcb-esp32·Kicad/Control de panel/Td2 solar.kicad_pcb

Td2 solar PCB layout, top view — open source ESP32 board by martincrespo77

About the Td2 solar PCB

Td2 solar is an open source ESP32 PCB design by martincrespo77, published on GitHub. It is a 2-layer board measuring 150 × 70 mm, with 35 components from 15 distinct parts.

Its main chip is the ESP32_DEVKIT_V1_30PIN, from the ESP32 family. Other key parts include the L298N, LM7805_TO220 and CNY74-4H. By type, the board carries 12 resistors, 9 diodes, 6 capacitors, 4 ICs and 4 connectors.

It belongs with the power & battery designs in this gallery.

From the project

Seguidor solar de 2 ejes con ESP32: firmware PlatformIO y PCB en KiCad

El proyecto Sun Tracker ESP32 constituye la modernización integral y migración de arquitectura del sistema de posicionamiento solar fotovoltaico de dos grados de libertad (Azimut horizontal y Elevación vertical), originalmente fundamentado en el informe de investigación UNDEFI 263 sobre microcontroladores AVR (ATmega168/328).

El problema crítico que resuelve este sistema es la maximización del rendimiento fotovoltaico instantáneo mediante el apuntamiento ortogonal permanente respecto al vector solar incidente. En lugar de depender de efemérides astronómicas a lazo abierto (que ignoran…

Td2 solar, from the project README
From the project README

Main components on the Td2 solar

Td2 solar bill of materials (BOM)

35 components, 15 distinct parts.

QtyPartRefs
1
L298N
U1
1
LM7805_TO220
U2
1
ESP32_DEVKIT_V1_30PIN
U3
1
CNY74-4H
U5
1
Output MOTORA
J1
1
Output MOTORB
J2
1
Input 9v
J5
1
Conn_01x05_Pin
J8
9
1N5822
D1, D2, D3, D4, D5, D6, D7, D8 +1
3
0.1u
C1, C4, C5
1
1u
C2
1
10u
C3
1
100u
C6
4
4k7
R1, R2, R3, R4
8
R
R5, R6, R7, R8, R9, R10, R11, R12

Td2 solar design files

The KiCad project lives in the martincrespo77/Paneles-solares-pcb-esp32 repository on GitHub; these links point at the commit this page was built from.

Td2 solar: common questions

What microcontroller does the Td2 solar use?

The Td2 solar is built around the ESP32_DEVKIT_V1_30PIN, from the ESP32 family.

How big is the Td2 solar PCB?

The Td2 solar measures 150 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Td2 solar?

35 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Td2 solar design files?

From the martincrespo77/Paneles-solares-pcb-esp32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Td2 solar design in my own project?

The repository has no license, so all rights stay with martincrespo77. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Td2 solar without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Paneles-solares-pcb-esp32

Similar boards