Gromofon
maslohaslo1234-spec·Gromofon
About the Gromofon PCB
Gromofon is an open source ESP32 PCB design by maslohaslo1234-spec, published on GitHub under the MIT license. It is a board, with 17 components from 16 distinct parts.
Its main chip is the esp32, from the ESP32 family. Other key parts include the L7812. By type, the board carries 5 capacitors, 4 connectors, 4 resistors, 1 IC, 1 transistor and 1 fuse.
It belongs with the audio, test & measurement and iot & wireless designs in this gallery.
From the project
A plasma speaker that turns audio signals into sound by modulating an electric arc. I want to explore how high-voltage electronics can become a musical instrument, with adjustable tones and simple melodies. The project will include a custom audio control circuit and an enclosed high-voltage section.
Gromofon is a project exploring how an electric arc can become a musical instrument. Instead of moving a conventional speaker cone, it produces sound by modulating the heating of the air around the arc.
Status: design phase. A draft schematic and the first firmware version are prepared, but no hardware has been built and no working HV prototype has been tested yet. The build is planned for week 8 of the Half Life programme.
Main components on the Gromofon
Gromofon bill of materials (BOM)
17 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7812 | U1 | |
| 1 | IRFP260N | TQFP-44_10x10mm_P0.8mm | Q1 |
| 1 | power supply | Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J1 |
| 1 | esp32 | Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J2 |
| 1 | TC4420 | J3 | |
| 1 | flyback | Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical | J4 |
| 1 | Fuse | PLCC-84_29.3x29.3mm_P1.27mm | F1 |
| 1 | UF5408 | D1 | |
| 1 | 2200 µF/35 V | C1 | |
| 1 | 1 µF / 50 V, X7R | C2 | |
| 1 | 10 nF / 1000 V DC, MKP | C3 | |
| 1 | 100 nF / 50 V, X7R | C4 | |
| 1 | 10 µF/50 V | C5 | |
| 1 | 10 Ω | R1 | |
| 2 | 10 kΩ | R2, R4 | |
| 1 | 22 kΩ/2 W | R3 |
Gromofon design files
The KiCad project lives in the maslohaslo1234-spec/Gromofon repository on GitHub; these links point at the commit this page was built from.
- Schematicgromofon.kicad_sch
- BOMBOM.csv
Gromofon: common questions
What microcontroller does the Gromofon use?
The Gromofon is built around the esp32, from the ESP32 family.
How many components are on the Gromofon?
17 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Gromofon design files?
From the maslohaslo1234-spec/Gromofon repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Gromofon design in my own project?
Yes, under the terms of its MIT license, which maslohaslo1234-spec chose for the repository.
Can I test firmware for the Gromofon without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k