Snowboarding Helmet Goggles HUD - carrier PCBs

masonk06·Snowboarding_helmet_goggles·hardware/kicad/SnowHUD.kicad_pcb

Snowboarding Helmet Goggles HUD - carrier PCBs PCB layout, top view — open source RP2040/RP2350 board by masonk06

About the Snowboarding Helmet Goggles HUD - carrier PCBs PCB

Snowboarding Helmet Goggles HUD - carrier PCBs is an open source RP2040/RP2350 PCB design by masonk06, published on GitHub. It is a 2-layer board measuring 66 × 63.5 mm, with 9 components from 9 distinct parts.

Its main chip is the Seeed XIAO RP2040, from the RP2040/RP2350 family. Other key parts include the ESP32-S3 DevKit (subset of pins), NEO-6M GPS (GY-NEO6MV2), MPU6050 (GY-521) addr 0x68 and BMP280 addr 0x76. By type, the board carries 5 ICs and 2 connectors.

It belongs with the iot & wireless, sensors and dev boards & breakouts designs in this gallery.

From the project

KiCad 10 project for two carrier PCBs that the owned development boards and breakout modules plug into:

KiCad 10 project for two carrier PCBs that the owned development boards and breakout modules plug into:

Both boards are in one SnowHUD.kicadpcb` (two separate outlines), 2 copper layers, 1.6 mm, with GND pours on both layers.

- ERC: 0 violations. - DRC: 0 violations, 0 unconnected items, 0 schematic-parity issues (run with --schematic-parity --refill-zones).

The original rev 0.1 bench-wiring schematic had no physical connectors between the goggle and jacket halves. To make real PCBs, rev 0.2 adds:

Snowboarding Helmet Goggles HUD - carrier PCBs, from the project README
From the project README

Main components on the Snowboarding Helmet Goggles HUD - carrier PCBs

Seeed XIAO RP2040ESP32-S3 DevKit (subset of pins)NEO-6M GPS (GY-NEO6MV2)MPU6050 (GY-521) addr 0x68BMP280 addr 0x76

Snowboarding Helmet Goggles HUD - carrier PCBs bill of materials (BOM)

9 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Seeed XIAO RP2040
U1
1
ESP32-S3 DevKit (subset of pins)
U2
1
NEO-6M GPS (GY-NEO6MV2)
U3
1
MPU6050 (GY-521) addr 0x68
U4
1
BMP280 addr 0x76
U5
1
Link to jacket
J3
1
Link to goggle
J4
1
Waveshare 1.51in OLED (LEFT)
DS1
1
Waveshare 1.51in OLED (RIGHT)
DS2

Snowboarding Helmet Goggles HUD - carrier PCBs design files

The KiCad project lives in the masonk06/Snowboarding_helmet_goggles repository on GitHub; these links point at the commit this page was built from.

Snowboarding Helmet Goggles HUD - carrier PCBs: common questions

What microcontroller does the Snowboarding Helmet Goggles HUD - carrier PCBs use?

The Snowboarding Helmet Goggles HUD - carrier PCBs is built around the Seeed XIAO RP2040, from the RP2040/RP2350 family.

How big is the Snowboarding Helmet Goggles HUD - carrier PCBs PCB?

The Snowboarding Helmet Goggles HUD - carrier PCBs measures 66 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Snowboarding Helmet Goggles HUD - carrier PCBs?

9 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Snowboarding Helmet Goggles HUD - carrier PCBs design files?

From the masonk06/Snowboarding_helmet_goggles repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Snowboarding Helmet Goggles HUD - carrier PCBs design in my own project?

The repository has no license, so all rights stay with masonk06. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Snowboarding Helmet Goggles HUD - carrier PCBs without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Snowboarding_helmet_goggles

Similar boards