Project ESP
MathysPelletier·PCB_CNC_Maisonneuve·Project_ESPV10/Project_ESP.kicad_pcb
About the Project ESP PCB
Project ESP is an open source ESP32 PCB design by MathysPelletier, published on GitHub. It is a 2-layer board measuring 42.6 × 46.8 mm, with 28 components from 17 distinct parts.
Its main chip is the ESP32-WROOM-32UE-N8, from the ESP32 family. Other key parts include the CP2102N-A02-GQFN28. By type, the board carries 10 resistors, 8 capacitors, 3 connectors, 2 ICs, 2 transistors and 2 switches.
It belongs with the robotics & motion designs in this gallery.
From the project
Schéma des circuits imprimés
Circuits imprimé pour la carte mère et le ESP32. Logiciel utilisé : KiCad 8.0
Main components on the Project ESP
Project ESP bill of materials (BOM)
28 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32UE-N8 | ESP32-WROOM-32UE_EXP | U1 |
| 1 | CP2102N-A02-GQFN28 | QFN28_5X5_SIL | U2 |
| 2 | SS8050-G S8050 | TRAN_SS8050-G_CIP-M | Q1, Q2 |
| 1 | CONN_01X16 Conn_01x16 | PinHeader_1x16_P2.54mm_Vertical | J1 |
| 1 | USB4105-GF-A 2171790001 | GCT_USB4105-GF-A | J2 |
| 1 | Conn_01x16 | PinHeader_1x16_P2.54mm_Vertical | J3 |
| 1 | SP0503BAHTG | TVS-SP05_LTF | CR1 |
| 1 | PTS636 SK43 SMTR LFS Reset | PTS636_SK | SW1 |
| 1 | PTS636 SK43 SMTR LFS Boot | PTS636_SK | SW2 |
| 6 | CC0603KRX7R8BB104 0.1uf | YAG_CC0603_YAG-M | C1, C2, C3, C4, C6, C8 |
| 1 | GRM188R61A226ME15D 22uf | YAG_CC0603_YAG-M | C5 |
| 1 | JMK107ABJ106MA-T 10uF | YAG_CC0603_YAG-M | C7 |
| 5 | RMCF0603JT10K0 10k | STA_RMCF0603_STP-M | R1, R2, R3, R4, R10 |
| 2 | CRCW06035K11FKEAC 5.11k | STA_RMCF0603_STP-M | R5, R6 |
| 1 | RMCF0603FT22K1 22.1k | STA_RMCF0603_STP-M | R7 |
| 1 | RMCF0603FT47K5 47.5K | STA_RMCF0603_STP-M | R8 |
| 1 | ERJ-3EKF2001V 2K | STA_RMCF0603_STP-M | R9 |
Project ESP design files
The KiCad project lives in the MathysPelletier/PCB_CNC_Maisonneuve repository on GitHub; these links point at the commit this page was built from.
Project ESP: common questions
What microcontroller does the Project ESP use?
The Project ESP is built around the ESP32-WROOM-32UE-N8, from the ESP32 family.
How big is the Project ESP PCB?
The Project ESP measures 42.6 × 46.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Project ESP?
28 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Project ESP design files?
From the MathysPelletier/PCB_CNC_Maisonneuve repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Project ESP design in my own project?
The repository has no license, so all rights stay with MathysPelletier. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Project ESP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in PCB_CNC_Maisonneuve
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k