42 open source boards using the CP2102N-A02-GQFN28

Real designs built with the CP2102N-A02-GQFN28, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

42 boardsClear filters|Most starred

How designs wire the CP2102N-A02-GQFN28

Read from the KiCad layouts of 27 open source designs, one per repository: what each pin of the CP2102N-A02-GQFN28 connects to, and the resistors, capacitors and other passives placed on it.

  • The RTS pin has a series resistor on 24 of 27 designs, most often 10 kΩ (then 4.7 kΩ).
  • The DTR pin has a series resistor on 24 of 27 designs, most often 10 kΩ (then 4.7 kΩ).
  • The DCD pin is left unconnected on 27 of 27 designs.
  • The RI/CLK pin is left unconnected on 27 of 27 designs.
DCDpin 1Connected to: Not connected 100%
RI/CLKpin 2Connected to: Not connected 100%
GNDpin 3, 29Connected to: GND 96%
VDDpin 6Connected to: 3.3V 74% · a signal 26%
  • Decoupling capacitor on 81% · 100 nF (19), 4.7 µF (12), 10 µF (8)
VREGINpin 7Connected to: 3.3V 89%
  • Decoupling capacitor on 70% · 100 nF (16), 10 µF (10), 4.7 µF (8)
VBUSpin 8Connected to: Signal 81% · 3.3V 19%
  • Resistor to GND on 74% · 47.5 kΩ (18), 47 kΩ (1), 48 kΩ (1)
  • Pull-up to VBUS on 52% · 22.1 kΩ (12), 22 kΩ (2)
  • Capacitor to GND on 41% · 1 µF (9), 100 nF (3), 10 µF (3)
RSTpin 9Connected to: Signal 93%
  • Pull-up to 3.3V on 74% · 1 kΩ (16), 2 kΩ (2), 4.7 kΩ (1)
NCpin 10Connected to: Not connected 100%
SUSPENDpin 11, 12Connected to: Not connected 72% · a signal 28%
  • Resistor to GND on 56% · 10 kΩ (11), 4.7 kΩ (2), 47.5 kΩ (1)
CHRENpin 13Connected to: Not connected 100%
CHR1pin 14Connected to: Not connected 100%
CHR0pin 15Connected to: Not connected 100%
GPIO.3/WAKEUPpin 16Connected to: Not connected 96%
GPIO.2/RS485pin 17Connected to: Not connected 96%
GPIO.1/RXTpin 18Connected to: Not connected 81%
GPIO.0/TXTpin 19Connected to: Not connected 81% · a signal 19%
GPIO.6pin 20Connected to: Not connected 96%
GPIO.5pin 21Connected to: Not connected 96%
GPIO.4pin 22Connected to: Not connected 96%
CTSpin 23Connected to: Not connected 100%
RTSpin 24Connected to: Signal 93%
  • Series resistor on 89% · 10 kΩ (23), 4.7 kΩ (1)
RXDpin 25Connected to: The microcontroller 59%
  • Series resistor on 33% · 0 Ω (7), 470 Ω (2)
TXDpin 26Connected to: The microcontroller 59%
  • Series resistor on 33% · 0 Ω (7), 470 Ω (2)
DSRpin 27Connected to: Not connected 100%
DTRpin 28Connected to: Signal 96%
  • Series resistor on 89% · 10 kΩ (23), 4.7 kΩ (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Roamr motors by uw-roamr, Mcu modulino by OpenAir-Lab, 3117 AUSIGN by r4hulrr and Omni wheel by remmaTech12.

The CP2102N-A02-GQFN28 in open source designs

The gallery holds 42 open source boards using the CP2102N-A02-GQFN28 from 27 GitHub repositories; a typical one measures about 88.3 × 78 mm and carries around 73 components.

71% use four copper layers or more, and 50% carry an open source license.

The most starred is Roamr motors by uw-roamr.

Microcontrollers on boards using the CP2102N-A02-GQFN28

CP2102N-A02-GQFN28: common questions

Where can I find a CP2102N-A02-GQFN28 reference design?

Each of the 42 boards on this page is a real design using the CP2102N-A02-GQFN28. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the CP2102N-A02-GQFN28 RTS pin?

The RTS pin has a series resistor on 24 of 27 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 27 open source designs using the CP2102N-A02-GQFN28.

What resistor goes on the CP2102N-A02-GQFN28 DTR pin?

The DTR pin has a series resistor on 24 of 27 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 27 open source designs using the CP2102N-A02-GQFN28.

How is the CP2102N-A02-GQFN28 DCD pin connected?

The DCD pin is left unconnected on 27 of 27 designs. Counted from the KiCad layouts of 27 open source designs using the CP2102N-A02-GQFN28.

What parts are used alongside the CP2102N-A02-GQFN28?

The USBLC6-2SC6, ESP32-WROOM-32E-N4, AP63203WU-7, ESP32-S3-WROOM-1 and AMS1117-3.3 appear in the most repositories here.

Which microcontrollers do boards using the CP2102N-A02-GQFN28 use?

Most are built on ESP32 (39), AVR/Arduino (1) and ESP8266 (1).

How big is a typical board using the CP2102N-A02-GQFN28?

The median is 88.3 × 78 mm, and 29% are two-layer designs.

What is the most popular open source board using the CP2102N-A02-GQFN28?

By GitHub stars, Roamr motors by uw-roamr, with 6 stars.

Can I simulate one of these boards using the CP2102N-A02-GQFN28 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part