75-Analog-Keyboard

matres24·75-Analog-Keyboard·DuzaKlawiatura/DuzaKlawiatura.kicad_pcb

75-Analog-Keyboard PCB layout, top view — open source STM32 board by matres24

About the 75-Analog-Keyboard PCB

75-Analog-Keyboard is an open source STM32 PCB design by matres24, published on GitHub. It is a 6-layer board measuring 320.8 × 128.3 mm, with 385 components from 29 distinct parts.

Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the CD74HC4067SM, SN74LV1T34DBV, PRTR5V0U2X, XC6206P332MR-Regulator_Linear and DRV2605LDGS. By type, the board carries 182 capacitors, 82 switches, 82 LEDs, 17 resistors, 11 ICs and 2 connectors.

It belongs with the keyboards designs in this gallery.

From the project

Analog Hall Effect Mechanical Keyboard

# 75%-Analog-Keyboard A custom-built mechanical keyboard featuring Hall effect sensors for analog key press detection. This project uses DRV5055A4 Hall sensors, magnets mounted in keycaps, and a CD74HC4067 multiplexer controlled by a microcontroller. Each key press is measured as a variable voltage, enabling analog input functionality. RGB LEDs (WS2812B) provide per-key lighting. This project is meant to fit into Monsgeek M1 case.

75-Analog-Keyboard, from the project README
From the project README

Main components on the 75-Analog-Keyboard

75-Analog-Keyboard bill of materials (BOM)

385 components, 29 distinct parts.

QtyPartRefs
6
CD74HC4067SM
U1, U2, U3, U4, U5, U10
1
STM32F072CBT6
U6
1
SN74LV1T34DBV
U7
1
PRTR5V0U2X
U8
1
XC6206P332MR-Regulator_Linear
U9
1
DRV2605LDGS
U11
1
Conn_01x02_Pin
J1
1
USB_C_Receptacle_USB2.0
J3
2
SW_SPST
BOOT0, RST1
6
100nF
Cx1, Cx2, Cx3, Cx4, Cx5, Cx6
1
500mA
F1
71
DRV5053
SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +63
1
DRV5053
SW28
2
DRV5053
SW30, SW43
2
DRV5053
SW45, SW70
2
DRV5053
SW57, SW59
3
DRV5053
SW73, SW74, SW75
1
DRV5053
SW76
82
WS2812B
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +74
82
0,1u
C1, C2, C3, C4, C5, C6, C7, C8 +74
Show 9 more
QtyPartRefs
5
10n
C83, C85, C86, C87, C98
1
10uF
C84
7
100nF
C88, C90, C91, C92, C93, C94, C97
1
10uF
C89
4
1uF
C95, C96, C99, C100
82
100n
C101, C102, C103, C104, C105, C106, C107, C108 +74
13
10k
R1, R2, R3, R4, R5, R6, R7, R8 +5
2
5.1k
R11, R12
2
2,2k
R16, R17

75-Analog-Keyboard design files

The KiCad project lives in the matres24/75-Analog-Keyboard repository on GitHub; these links point at the commit this page was built from.

75-Analog-Keyboard: common questions

What microcontroller does the 75-Analog-Keyboard use?

The 75-Analog-Keyboard is built around the STM32F072CBT6, from the STM32 family.

How big is the 75-Analog-Keyboard PCB?

The 75-Analog-Keyboard measures 320.8 × 128.3 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the 75-Analog-Keyboard?

385 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the 75-Analog-Keyboard design files?

From the matres24/75-Analog-Keyboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 75-Analog-Keyboard design in my own project?

The repository has no license, so all rights stay with matres24. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 75-Analog-Keyboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards