33 open source boards using the CD74HC4067SM
Real designs built with the CD74HC4067SM, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Zellia80-HE
mhdimo
344 × 117.5 mm479 parts4LLGPL-2.124AVR/Arduino
Oscillator Board
Bad-Dog-Designs
229 × 96 mm132 parts2LNo license18RP2040/RP2350
Platform16
lerouxb
112 × 86.3 mm108 parts2LNo license6ESP32
ProtoBoard
ciborg971
56 × 48 mm84 parts4LMIT5STM32
75-Analog-Keyboard
matres24
320.8 × 128.3 mm385 parts6LNo license2FullKeyboardV1
alxhoff
305.6 × 104.9 mm243 parts2LGPL-3.02STM32
Zellia80-HE
Zellia-Keyboards
344 × 117.5 mm479 parts4LLGPL-2.11LINE Main
MUNAKATA-EPC
119.4 × 119.4 mm137 parts2LNo license1Unchat keeb
gkanwar
141.8 × 86.9 mm83 parts2LCustom license1MagCam
miki407
140 × 150 mm572 parts2LGPL-3.00SoundLab16StepSequencer
JakeBoothy
314.9 × 110 mm348 parts4LNo license0Center Line
MUNAKATA-EPC
119.8 × 119.8 mm134 parts2LNo license0ESP32
Bigthemio
techandpeople180.1 × 102.5 mm117 parts4LGPL-3.00STM32
G431rapidtrigger
Cacaomeme
100 × 100 mm90 parts2LNo license0Line V2
MUNAKATA-EPC
116 × 116 mm86 parts2LNo license0ESP8266
Mqr speedrunLineFollower
MisaelMil
142.6 × 85.1 mm67 parts2LGPL-3.00ESP8266
LineFollower-Speedy-
Club-robotica-UDLSB
142.6 × 85.1 mm67 parts2LGPL-3.00STM32
F042-touchless angle sensor
barafael
92 × 48.5 mm36 parts2LMIT0- schematic only · 159 parts
SmartBMS Active balancing
koko69420
159 partsNo license0 Flight computer
Purdue-Space-Program
78 × 67 mm102 parts4LNo license2Linesensor Japan prot2
Tellurnoid
139.9 × 140 mm141 parts2LNo license1AVR/Arduino
Commons Board
Bad-Dog-Designs
229 × 96 mm95 parts2LNo license18Linesensor Japan prot1
Tellurnoid
140 × 140 mm140 parts2LNo license1IR board syuuseibann
MUNAKATA-EPC
110 × 110 mm64 parts2LNo license1Linesensor Japan prot2
Tellurnoid
139.9 × 140 mm141 parts2LNo license0SensorBoard
MUNAKATA-EPC
100 × 100 mm91 parts2LNo license0Line all borard
MUNAKATA-EPC
196 × 162.9 mm70 parts2LNo license016-pin analog / digital multiplexor breakout board
6r1d
26.3 × 42.3 mm5 parts2LMIT2ESP32
IR Japan prot2
Tellurnoid
100 × 100 mm66 parts2LNo license1Sensor
MUNAKATA-EPC
100 × 100 mm59 parts2LNo license0ESP32
IR Japan prot1
Tellurnoid
100 × 100 mm65 parts2LNo license1ESP32
IR Japan prot3
Tellurnoid
100 × 100 mm65 parts2LNo license1LineIntegratedBoard
MUNAKATA-EPC
31.7 × 28 mm6 parts2LNo license0
How designs wire the CD74HC4067SM
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the CD74HC4067SM connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 14 of 22 designs, most often 100 nF (then 470 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 12 | Connected to: GND 100% | — |
| VCCpin 24 | Connected to: 3.3V 100% |
|
22 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zellia80-HE by mhdimo, Commons Board by Bad-Dog-Designs, Platform16-pcb by lerouxb and ProtoBoard by ciborg971.
The CD74HC4067SM in open source designs
The gallery holds 33 open source boards using the CD74HC4067SM from 23 GitHub repositories; a typical one measures about 129.9 × 100 mm and carries around 95 components.
78% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is Zellia80-HE by mhdimo.
Parts used alongside the CD74HC4067SM
Microcontrollers on boards using the CD74HC4067SM
What boards using the CD74HC4067SM are built for
CD74HC4067SM: common questions
Where can I find a CD74HC4067SM reference design?
Each of the 33 boards on this page is a real design using the CD74HC4067SM. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the CD74HC4067SM VCC pin?
The VCC pin has a decoupling capacitor on 14 of 22 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 22 open source designs using the CD74HC4067SM.
What parts are used alongside the CD74HC4067SM?
The TSSP58038, AMS1117-3.3, AMS1117-5.0, DRV2605LDGS and DRV8825_breakout appear in the most repositories here.
Which microcontrollers do boards using the CD74HC4067SM use?
Most are built on ESP32 (5), STM32 (5), AVR/Arduino (2) and ESP8266 (2).
How big is a typical board using the CD74HC4067SM?
The median is 129.9 × 100 mm, and 78% are two-layer designs.
What is the most popular open source board using the CD74HC4067SM?
By GitHub stars, Zellia80-HE by mhdimo, with 24 stars.
Can I simulate one of these boards using the CD74HC4067SM before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.