Bodge
About the Bodge PCB
Bodge is an open source PCB design by MatthiasGeorgImhof, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 22 × 6.5 mm, with 7 components from 3 distinct parts.
Other key parts include the SN74AVC8T245PWR and SN74AVC4T245PW. By type, the board carries 4 capacitors and 3 ICs.
It belongs with the science & space and power & battery designs in this gallery.
From the project
Hardware design files for Cubesat PCBs
Hardware design files for 1x cubesat: - EPS board - batteries and battery management for solar cells charging - voltage regulatars - RTC clock - Avionics board - IMU and magnetometer - sun detectors - magnetorquer control - Science board - cameras and imagers - Communication board - 915 MHz link - ethernet port for satelite modem
In addition, there is also - Auxilliary board that stands provides desktop power and connectivity - USB connection to computer - voltage regulators
Main components on the Bodge
Bodge bill of materials (BOM)
7 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74AVC8T245PWR TI | TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
| 2 | SN74AVC4T245PW TI | TSSOP-16_4.4x5mm_P0.65mm | U2, U3 |
| 4 | GRM155R61C105MA12D 1uF Murata | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C4 |
Bodge design files
The KiCad project lives in the MatthiasGeorgImhof/Hardware_CSAT repository on GitHub; these links point at the commit this page was built from.
Bodge: common questions
How big is the Bodge PCB?
The Bodge measures 22 × 6.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Bodge?
7 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Bodge design files?
From the MatthiasGeorgImhof/Hardware_CSAT repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Bodge design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
More boards in Hardware_CSAT
STM32EPS
80 × 80 mm238 parts4LCC-BY-NC-4.00
STM32Sci board
80 × 80 mm197 parts4LCC-BY-NC-4.00
STM32AVIONICS BOARD
80 × 80 mm178 parts4LCC-BY-NC-4.00
STM32OpenLST
80 × 80 mm171 parts4LCC-BY-NC-4.00
STM32Sci board wo switches
80 × 80 mm168 parts4LCC-BY-NC-4.00
STM32Auxio board
80 × 80 mm124 parts4LCC-BY-NC-4.00
STM32Aux board
80 × 80 mm121 parts4LCC-BY-NC-4.00
Bodge oshkosh
22 × 6.5 mm7 parts4LCC-BY-NC-4.00
Similar boards
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
ControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k