CSD Cylindrical Scanner Device
About the CSD Cylindrical Scanner Device PCB
CSD Cylindrical Scanner Device is an open source AVR/Arduino PCB design by maxtat3, published on GitHub. It is a 2-layer board measuring 70.5 × 95.3 mm, with 98 components from 50 distinct parts.
Its main chip is the ATmega8-16AU, from the AVR/Arduino family. Other key parts include the AP1117-50, MCP3421A0T-ECH, LM324, FT232RL and MP1584EN-LF-Z. By type, the board carries 31 capacitors, 26 resistors, 10 diodes, 8 connectors, 6 ICs and 4 transistors.
From the project
Установка для исследования процессов активации поверхностей цилиндрических образцов
Main components on the CSD Cylindrical Scanner Device
CSD Cylindrical Scanner Device bill of materials (BOM)
98 components, 50 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP1117-50 | SOT-223-3_TabPin2 | U1 |
| 1 | MCP3421A0T-ECH | SOT-23-6_Handsoldering | U2 |
| 1 | ATmega8-16AU | TQFP-32_7x7mm_P0.8mm | U3 |
| 1 | LM324 | SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U5 |
| 1 | MP1584EN-LF-Z | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.35x2.35mm | U6 |
| 1 | Stepper_Motor_unipolar_5pin | JST_EH_B05B-EH-A_1x05_P2.50mm_Vertical | M1 |
| 4 | IRLML0030 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | 7.3728 MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | Conn_power | JST_EH_B02B-EH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Conn_sensor_led | JST_EH_B02B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | Conn_opto_int | JST_EH_B03B-EH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | Conn_sensor_VT | JST_EH_B02B-EH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | Conn btn start/stop msr | JST_EH_B02B-EH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Conn led start/stop msr | JST_EH_B02B-EH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | Conn_USB | JST_EH_B03B-EH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | AVR-ISP-6 | IDC-Header_2x03_P2.54mm_Vertical | J8 |
| 1 | select | JST_EH_B03B-EH-A_1x03_P2.50mm_Vertical | JP1 |
| 1 | sel ADC | JST_EH_B03B-EH-A_1x03_P2.50mm_Vertical | JP2 |
| 2 | 1k | Potentiometer_Vishay_T7-YA_Single_Vertical | RV1, RV5 |
Show 30 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1k | Potentiometer_Bourns_3296W_Vertical | RV2, RV3 |
| 1 | 33k | Potentiometer_Bourns_3296W_Vertical | RV4 |
| 2 | 10MQ040N | D_SMA | D1, D10 |
| 1 | Power | LED_0805_2012Metric | D2 |
| 1 | LL4148 | D_MiniMELF | D3 |
| 1 | FT232_TX_LED | LED_0805_2012Metric | D4 |
| 1 | FT232_RX_LED | LED_0805_2012Metric | D5 |
| 4 | US1M | D_SMA | D6, D7, D8, D9 |
| 1 | 100uH | L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | L1 |
| 2 | 100uH | L_Vishay_IHLP-1616 | L2, L3 |
| 1 | 15uH | L_12x12mm_H6mm | L4 |
| 1 | 100uF 16V | CP_EIA-7343-31_Kemet-D | C1 |
| 1 | 470uF 16V | CP_Elec_10x10 | C2 |
| 1 | 100uF 6.3V | CP_EIA-3528-21_Kemet-B | C3 |
| 17 | 100nF | C_0805_2012Metric | C4, C5, C6, C7, C8, C10, C11, C12 +9 |
| 3 | 10uF 16V | CP_EIA-3528-21_Kemet-B | C9, C13, C14 |
| 2 | 22pF | C_0805_2012Metric | C17, C18 |
| 1 | 1uF | C_1210_3225Metric | C20 |
| 1 | 22uF 6.3V | CP_EIA-3528-21_Kemet-B | C22 |
| 1 | 470uF 16V | CP_Elec_10x12.5 | C25 |
| 1 | 68uF 16V | CP_EIA-3528-21_Kemet-B | C26 |
| 1 | 22uF 16V | CP_EIA-3528-21_Kemet-B | C28 |
| 1 | 220pF | C_0805_2012Metric | C31 |
| 11 | 1k | R_0805_2012Metric | R1, R8, R10, R11, R12, R13, R14, R16 +3 |
| 5 | 10k | R_0805_2012Metric | R2, R3, R4, R6, R7 |
| 2 | 510E | R_0805_2012Metric | R5, R9 |
| 4 | 51k | R_0805_2012Metric | R15, R21, R24, R26 |
| 1 | 22k | R_0805_2012Metric | R17 |
| 2 | 100k | R_0805_2012Metric | R18, R22 |
| 1 | 68k | R_0805_2012Metric | R20 |
CSD Cylindrical Scanner Device design files
The KiCad project lives in the maxtat3/CSD_Cylindrical_Scanner_Device repository on GitHub; these links point at the commit this page was built from.
CSD Cylindrical Scanner Device: common questions
What microcontroller does the CSD Cylindrical Scanner Device use?
The CSD Cylindrical Scanner Device is built around the ATmega8-16AU, from the AVR/Arduino family.
How big is the CSD Cylindrical Scanner Device PCB?
The CSD Cylindrical Scanner Device measures 70.5 × 95.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CSD Cylindrical Scanner Device?
98 components, from 50 distinct parts. The full bill of materials is listed on this page.
Where can I download the CSD Cylindrical Scanner Device design files?
From the maxtat3/CSD_Cylindrical_Scanner_Device repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the CSD Cylindrical Scanner Device design in my own project?
The repository has no license, so all rights stay with maxtat3. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CSD Cylindrical Scanner Device without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k