5 open source boards using the ATmega8-16AU
Real designs built with the ATmega8-16AU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
EnocderDriver
NikodemBartnik
84.3 × 58.4 mm35 parts2LNo license55AVR/Arduino
CSD Cylindrical Scanner Device
maxtat3
70.5 × 95.3 mm98 parts2LNo license0AVR/Arduino
Traffic lights
ilusder
26.4 × 61.6 mm47 parts2LNo license0AVR/Arduino
PSX64 Adapter
Commodore-Bench
40.5 × 19 mm16 parts2LCC-BY-NC-4.00AVR/Arduino
SirDuke
vul-os
42.4 × 14.1 mm20 parts2LApache-2.055
How designs wire the ATmega8-16AU
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ATmega8-16AU connects to, and the resistors, capacitors and other passives placed on it.
- Pin 7 has a crystal on 5 of 5 designs, most often 16 MHz (then 7.3728 MHz).
- Pin 8 has a crystal on 5 of 5 designs, most often 16 MHz (then 7.3728 MHz).
- Pin 19 is left unconnected on 5 of 5 designs.
- Pin 22 is left unconnected on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: Signal 60% · not connected 40% |
|
| Pin 3 | Connected to: GND 80% · a signal 20% | — |
| Pin 4 | Connected to: 5V 80% · a signal 20% | — |
| Pin 5 | Connected to: GND 80% · a signal 20% | — |
| Pin 6 | Connected to: 5V 80% · a signal 20% | — |
| Pin 7 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: Signal 100% |
|
| Pin 9 | Connected to: Signal 60% · not connected 40% |
|
| Pin 13 | Connected to: Signal 80% · not connected 20% |
|
| Pin 18 | Connected to: VCC 60% · a signal 40% |
|
| Pin 19 | Connected to: Not connected 100% | — |
| Pin 20 | Connected to: Not connected 60% · a signal 40% |
|
| Pin 21 | Connected to: GND 80% · a signal 20% | — |
| Pin 22 | Connected to: Not connected 100% | — |
| Pin 24 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 25 | Connected to: Not connected 60% · a signal 40% | — |
| Pin 26 | Connected to: Not connected 100% | — |
| Pin 29 | Connected to: A connector 100% |
|
14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include EnocderDriver by NikodemBartnik, SirDuke by vul-os, PSX64 Adapter by Commodore-Bench and Traffic lights by ilusder.
The ATmega8-16AU in open source designs
The gallery holds 5 open source boards using the ATmega8-16AU from 5 GitHub repositories; a typical one measures about 42.4 × 58.4 mm and carries around 35 components.
100% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is EnocderDriver by NikodemBartnik.
Microcontrollers on boards using the ATmega8-16AU
What boards using the ATmega8-16AU are built for
ATmega8-16AU: common questions
Where can I find a ATmega8-16AU reference design?
Each of the 5 boards on this page is a real design using the ATmega8-16AU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ATmega8-16AU pin 7 connected?
Pin 7 has a crystal on 5 of 5 designs, most often 16 MHz (then 7.3728 MHz). Counted from the KiCad layouts of 5 open source designs using the ATmega8-16AU.
How is the ATmega8-16AU pin 8 connected?
Pin 8 has a crystal on 5 of 5 designs, most often 16 MHz (then 7.3728 MHz). Counted from the KiCad layouts of 5 open source designs using the ATmega8-16AU.
How is the ATmega8-16AU pin 19 connected?
Pin 19 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ATmega8-16AU.
Which microcontrollers do boards using the ATmega8-16AU use?
Most are built on AVR/Arduino (5).
How big is a typical board using the ATmega8-16AU?
The median is 42.4 × 58.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the ATmega8-16AU?
By GitHub stars, EnocderDriver by NikodemBartnik, with 55 stars.
Can I simulate one of these boards using the ATmega8-16AU before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.