Spikeling ESP32
MaxZimmer·Spikeling-V2-dev·legacy/V 2.0/PCB/Spikeling_ESP32.kicad_pcb
About the Spikeling ESP32 PCB
Spikeling ESP32 is an open source ESP32 PCB design by MaxZimmer, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 120 × 80 mm, with 27 components from 27 distinct parts.
Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family.
From the project
Spikeling V2.0 is an educational tool for neuroscience students and enthusiasts!
Spikeling V2.0 is an educational tool for neuroscience students and enthusiasts!
Technically, it consists on a microcontroller (an ESP32) running the computationally efficient Izhikevich model of a spiking neuron.
This project is licensed under the GNU General Public License v3.0 The hardware is licensed under the CERN OHL v1.2
While this is not a stable version just yet, enthusiasts and potential collaborators can source the electronic bits for this project from KitSpace

Spikeling ESP32 bill of materials (BOM)
27 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C1 | CP_Radial_D4.0mm_P2.00mm | 1nF RC |
| 1 | R2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 10kΩ PD pull-down |
| 1 | R5 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 10kΩ SW pull-down |
| 1 | R1 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 10Ω RC |
| 1 | R6 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 50Ω CharliePlex1 |
| 1 | R7 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 50Ω_CharliePlex2 |
| 1 | R8 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 50Ω_CharliePlex3 |
| 1 | R9 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 50Ω_CharliePlex4 |
| 1 | R4 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 100Ω Spike LED |
| 1 | R3 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | 100Ω Stim-LED |
| 1 | ESP32-DEVKITC-32D | MODULE_ESP32-DEVKITC-32D | ESP32-WROOM dev module |
| 1 | RV1 | Potentiometer_Alps_RK09K_Single_Vertical | Synapse 1 Gain |
| 1 | RV2 | Potentiometer_Alps_RK09K_Single_Vertical | Synapse 2 Gain |
| 1 | J2 | Audio Jack 3.5mm | Synapse In 1 |
| 1 | J3 | Audio Jack 3.5mm | Synapse in 2 |
| 1 | D2 | LED_D3.0mm | Mode1 |
| 1 | D3 | LED_D3.0mm | Mode2 |
| 1 | D4 | LED_D3.0mm | Mode3 |
| 1 | D5 | LED_D3.0mm | Mode4 |
| 1 | D6 | LED_D3.0mm | Mode5 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D7 | LED_D3.0mm | Mode6 |
| 1 | D8 | LED_D3.0mm | Mode7 |
| 1 | LED | LED_D3.0mm | Mode8 |
| 1 | D10 | LED_D3.0mm | Mode9 |
| 1 | D11 | LED_D3.0mm | Mode10 |
| 1 | D12 | LED_D3.0mm | Mode11 |
| 1 | D13 | LED_D3.0mm | Mode12 |
Spikeling ESP32 design files
The KiCad project lives in the MaxZimmer/Spikeling-V2-dev repository on GitHub; these links point at the commit this page was built from.
Spikeling ESP32: common questions
What microcontroller does the Spikeling ESP32 use?
The Spikeling ESP32 is built around the ESP32-DEVKITC-32D, from the ESP32 family.
How big is the Spikeling ESP32 PCB?
The Spikeling ESP32 measures 120 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Spikeling ESP32?
27 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Spikeling ESP32 design files?
From the MaxZimmer/Spikeling-V2-dev repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Spikeling ESP32 design in my own project?
Yes, under the terms of its GPL-3.0 license, which MaxZimmer chose for the repository.
Can I test firmware for the Spikeling ESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Spikeling-V2-dev
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k