Spikeling V2.2c
MaxZimmer·Spikeling-V2-dev·PCB - v2.2c/Spikeling_V2.2c.kicad_pcb
About the Spikeling V2.2c PCB
Spikeling V2.2c is an open source ESP32 PCB design by MaxZimmer, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 120 × 80 mm, with 43 components from 35 distinct parts.
Its main chip is the ESP32-DEVKITC-32D, from the ESP32 family. Other key parts include the MCP3208. By type, the board carries 14 diodes, 9 resistors, 4 connectors, 3 ICs, 3 capacitors and 2 switches.
From the project
Spikeling V2.0 is an educational tool for neuroscience students and enthusiasts!
Spikeling V2.0 is an educational tool for neuroscience students and enthusiasts!
Technically, it consists on a microcontroller (an ESP32) running the computationally efficient Izhikevich model of a spiking neuron.
This project is licensed under the GNU General Public License v3.0 The hardware is licensed under the CERN OHL v1.2
While this is not a stable version just yet, enthusiasts and potential collaborators can source the electronic bits for this project from KitSpace

Main components on the Spikeling V2.2c
Spikeling V2.2c bill of materials (BOM)
43 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-DEVKITC-32D | MODULE_ESP32-DEVKITC-32D | U1 |
| 2 | MCP3208 | DIP-16_W7.62mm | U2, U3 |
| 1 | Synapse Out | Spikeling Audio Jack 3.5mm | J1 |
| 1 | Synapse in 1 | Spikeling Audio Jack 3.5mm | J2 |
| 1 | Current in | Spikeling Audio Jack 3.5mm | J4 |
| 1 | Stimulus Out | Spikeling Audio Jack 3.5mm | J5 |
| 1 | Spike Buzzer | Buzzer_11.5x9.5RM5 | BZ1 |
| 1 | Synapse 1 Gain | Spikeling Potentiometer | RV1 |
| 1 | Synapse 2 Gain | Spikeling Potentiometer | RV2 |
| 1 | Voltage Membrane | Spikeling Potentiometer | RV3 |
| 1 | Noise | Spikeling Potentiometer | RV4 |
| 1 | Photodiode Gain | Spikeling Potentiometer | RV5 |
| 1 | Stimulus Strength | Spikeling Potentiometer | RV6 |
| 1 | Stimulus Frequency | Spikeling Potentiometer | RV7 |
| 1 | Mode Button | SW_PUSH_6mm_H13mm | SW1 |
| 1 | Reset Button | Spikeling reset button | SW2 |
| 1 | Photodiode | LED_D5.0mm | D1 |
| 1 | Mode1 | LED_D3.0mm | D2 |
| 1 | Mode2 | LED_D3.0mm | D3 |
| 1 | Mode3 | LED_D3.0mm | D4 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Mode4 | LED_D3.0mm | D5 |
| 1 | Mode5 | LED_D3.0mm | D6 |
| 1 | Mode6 | LED_D3.0mm | D7 |
| 1 | Mode7 | LED_D3.0mm | D8 |
| 1 | Mode8 | LED_D3.0mm | D9 |
| 1 | Mode9 | LED_D3.0mm | D10 |
| 1 | Mode10 | LED_D3.0mm | D11 |
| 1 | Mode11 | LED_D3.0mm | D12 |
| 1 | Mode12 | LED_D3.0mm | D13 |
| 1 | Spike LED | LED_D5.0mm-4_RGB | D14 |
| 2 | 1 μF | CP_Radial_D4.0mm_P2.00mm | C1, C2 |
| 1 | 1nF | C_Disc_D10.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 10OHM 10Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 10kΩ | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R5 |
| 6 | 100Ω | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R6, R7, R8, R9 |
Spikeling V2.2c design files
The KiCad project lives in the MaxZimmer/Spikeling-V2-dev repository on GitHub; these links point at the commit this page was built from.
Spikeling V2.2c: common questions
What microcontroller does the Spikeling V2.2c use?
The Spikeling V2.2c is built around the ESP32-DEVKITC-32D, from the ESP32 family.
How big is the Spikeling V2.2c PCB?
The Spikeling V2.2c measures 120 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Spikeling V2.2c?
43 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Spikeling V2.2c design files?
From the MaxZimmer/Spikeling-V2-dev repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Spikeling V2.2c design in my own project?
Yes, under the terms of its GPL-3.0 license, which MaxZimmer chose for the repository.
Can I test firmware for the Spikeling V2.2c without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Spikeling-V2-dev
Earlier revisions in the repo: Spikeling_V2.2, Spikeling_V2.1
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k