C3-wroom ext clk set
About the C3-wroom ext clk set PCB
C3-wroom ext clk set is an open source PCB design by McbeEringi, published on GitHub under the MIT license. It is a 2-layer board measuring 94 × 95.2 mm, with 27 components from 15 distinct parts.
Other key parts include the D168K and 74HC595. By type, the board carries 10 resistors, 6 ICs, 3 connectors, 2 switches, 2 capacitors and 1 transistor.
Main components on the C3-wroom ext clk set
C3-wroom ext clk set bill of materials (BOM)
27 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | D168K | D1X8K | U1, U4, U5, U6 |
| 2 | 74HC595 | TSSOP-16_4.4x5mm_P0.65mm | U2, U3 |
| 1 | BPW40 | LED_D5.0mm_Clear | Q1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | IN2 | PinSocket_1x09_P2.54mm_Vertical | J2 |
| 1 | OUT2 | PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | Buzzer | Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 2 | SW_Push | alps-skrg | SW1, SW2 |
| 1 | Thermistor | R_0603_1608Metric | TH1 |
| 1 | WS2812B-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1 |
| 2 | 1u | C_0603_1608Metric | C1, C2 |
| 1 | 10k | R_0603_1608Metric | R1 |
| 7 | 1k | R_0603_1608Metric | R2, R3, R4, R5, R6, R7, R8 |
| 1 | R_PT | R_0603_1608Metric | R9 |
| 1 | R_THERMO | R_0603_1608Metric | R10 |
C3-wroom ext clk set design files
The KiCad project lives in the McbeEringi/pcb-stuff repository on GitHub; these links point at the commit this page was built from.
C3-wroom ext clk set: common questions
How big is the C3-wroom ext clk set PCB?
The C3-wroom ext clk set measures 94 × 95.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the C3-wroom ext clk set?
27 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the C3-wroom ext clk set design files?
From the McbeEringi/pcb-stuff repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the C3-wroom ext clk set design in my own project?
Yes, under the terms of its MIT license, which McbeEringi chose for the repository.
More boards in pcb-stuff
AVR/Arduino260321
48 × 73 mm66 parts2LMIT2
AVR/ArduinoSlim
44 × 44 mm64 parts2LMIT2
AVR/ArduinoMb n boost
100 × 86 mm60 parts2LMIT2
AVR/ArduinoMatrix-7seg8-x02-x06
95 × 100 mm51 parts2LMIT2
260119
100 × 90 mm45 parts2LMIT2
AVR/ArduinoSerial usbc dip-7seg clk
100 × 100 mm42 parts2LMIT2
AVR/ArduinoCard avr
90.2 × 53.3 mm18 parts2LMIT2
AVR/ArduinoTx04-mx09
99.1 × 96.5 mm17 parts2LMIT2
AVR/ArduinoTx04-pdfix
91.1 × 88.9 mm17 parts2LMIT2
ESP32Card c3
90.9 × 54.9 mm11 parts2LMIT2