Tx04-mx09
McbeEringi·pcb-stuff·paneled/tx04-mx09/tx04-mx09.kicad_pcb
About the Tx04-mx09 PCB
Tx04-mx09 is an open source AVR/Arduino PCB design by McbeEringi, published on GitHub under the MIT license. It is a 2-layer board measuring 99.1 × 96.5 mm, with 17 components from 12 distinct parts.
Its main chip is the ATtiny1604-SS, from the AVR/Arduino family. Other key parts include the CH340E and TS5A23159DGS. By type, the board carries 7 resistors, 3 ICs, 2 connectors, 2 diodes, 2 capacitors and 1 switch.
Main components on the Tx04-mx09
Tx04-mx09 bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATtiny1604-SS | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | TS5A23159DGS | VSSOP-10_3x3mm_P0.5mm | U3 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Conn_02x07_Counter_Clockwise | DIP-14_W10.16mm | J2 |
| 1 | SW_Push | alps-skrp | SW1 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 1 | 4u7 | C_0603_1608Metric | C1 |
| 1 | 0u1 | C_0603_1608Metric | C3 |
| 2 | 10k | R_0603_1608Metric | R1, R7 |
| 3 | 4.7k | R_0603_1608Metric | R2, R3, R4 |
| 2 | 5k1 | R_0603_1608Metric | R5, R6 |
Tx04-mx09 design files
The KiCad project lives in the McbeEringi/pcb-stuff repository on GitHub; these links point at the commit this page was built from.
Tx04-mx09: common questions
What microcontroller does the Tx04-mx09 use?
The Tx04-mx09 is built around the ATtiny1604-SS, from the AVR/Arduino family.
How big is the Tx04-mx09 PCB?
The Tx04-mx09 measures 99.1 × 96.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tx04-mx09?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tx04-mx09 design files?
From the McbeEringi/pcb-stuff repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Tx04-mx09 design in my own project?
Yes, under the terms of its MIT license, which McbeEringi chose for the repository.
Can I test firmware for the Tx04-mx09 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in pcb-stuff
AVR/Arduino
260321
McbeEringi
48 × 73 mm66 parts2LMIT2AVR/Arduino
Slim
McbeEringi
44 × 44 mm64 parts2LMIT2AVR/Arduino
Mb n boost
McbeEringi
100 × 86 mm60 parts2LMIT2AVR/Arduino
Matrix-7seg8-x02-x06
McbeEringi
95 × 100 mm51 parts2LMIT2260119
McbeEringi
100 × 90 mm45 parts2LMIT2AVR/Arduino
Serial usbc dip-7seg clk
McbeEringi
100 × 100 mm42 parts2LMIT2C3-wroom ext clk set
McbeEringi
94 × 95.2 mm27 parts2LMIT2AVR/Arduino
Card avr
McbeEringi
90.2 × 53.3 mm18 parts2LMIT2AVR/Arduino
Tx04-pdfix
McbeEringi
91.1 × 88.9 mm17 parts2LMIT2ESP32
Card c3
McbeEringi
90.9 × 54.9 mm11 parts2LMIT2
Similar boards
AVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0kAVR/Arduino
Megadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818AVR/Arduino
Easyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746