HardLabs

Matrix-7seg8-x02-x06

McbeEringi·pcb-stuff·paneled/matrix-7seg8-x02-x06/matrix-7seg8-x02-x06.kicad_pcb

Matrix-7seg8-x02-x06 PCB layout, top view — open source AVR/Arduino board by McbeEringi

About the Matrix-7seg8-x02-x06 PCB

Matrix-7seg8-x02-x06 is an open source AVR/Arduino PCB design by McbeEringi, published on GitHub under the MIT license. It is a 2-layer board measuring 95 × 100 mm, with 51 components from 24 distinct parts.

Its main chip is the ATtiny202-SS, from the AVR/Arduino family. Other key parts include the 74HC595, D168K, CH340E, AVR_DISP and TS5A23159DGS. By type, the board carries 24 resistors, 14 ICs, 4 connectors, 4 capacitors, 3 diodes and 1 jumper.

Main components on the Matrix-7seg8-x02-x06

74HC595D168KATtiny202-SSCH340EAVR_DISPTS5A23159DGSAVR_CTL

Matrix-7seg8-x02-x06 bill of materials (BOM)

51 components, 24 distinct parts.

QtyPartRefs
3
74HC595
U1, U2, U3
4
D168K
U4, U7, U9, U10
2
ATtiny202-SS
U5, U6
2
CH340E
U8, U12
1
AVR_DISP
U11
1
TS5A23159DGS
U13
1
AVR_CTL
U14
1
Conn_02x10_Counter_Clockwise
J1
3
USB_C_Receptacle_USB2.0_16P
J2, J3, J4
1
4k7
JP1
1
SW_Push
SW1
2
LTP-12188M-08
D1, D2
1
LED_TNOW
D3
1
10n
C1
2
0u1
C2, C3
1
100u
C4
2
10k
R1, R6
1
4.7k
R2
7
150R
R3, R4, R7, R10, R11, R15, R16
8
4k7
R5, R13, R14, R18, R19, R20, R22, R23
Show 4 more
QtyPartRefs
1
100R
R8
2
1k
R9, R17
2
R_TNOW
R12, R21
1
NC
R24

Matrix-7seg8-x02-x06 design files

The KiCad project lives in the McbeEringi/pcb-stuff repository on GitHub; these links point at the commit this page was built from.

Matrix-7seg8-x02-x06: common questions

What microcontroller does the Matrix-7seg8-x02-x06 use?

The Matrix-7seg8-x02-x06 is built around the ATtiny202-SS, from the AVR/Arduino family.

How big is the Matrix-7seg8-x02-x06 PCB?

The Matrix-7seg8-x02-x06 measures 95 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Matrix-7seg8-x02-x06?

51 components, from 24 distinct parts. The full bill of materials is listed on this page.

Where can I download the Matrix-7seg8-x02-x06 design files?

From the McbeEringi/pcb-stuff repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Matrix-7seg8-x02-x06 design in my own project?

Yes, under the terms of its MIT license, which McbeEringi chose for the repository.

Can I test firmware for the Matrix-7seg8-x02-x06 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in pcb-stuff

Similar boards