Pream G5 with Pistortion System
McColson·Stompbox-G5·G5_preamp/RC2/PCB_main/pcb_main.kicad_pcb
About the Pream G5 with Pistortion System PCB
Pream G5 with Pistortion System is an open source PCB design by McColson, published on GitHub under the Custom license license. It is a 2-layer board measuring 165 × 58 mm, with 50 components from 46 distinct parts.
Other key parts include the MC34063AP and NCH6100HV. By type, the board carries 12 resistors, 11 capacitors, 7 connectors, 3 diodes, 2 ICs and 2 transistors.
It belongs with the audio designs in this gallery.
From the project
Guitar preamp stompbox
Main components on the Pream G5 with Pistortion System
Pream G5 with Pistortion System bill of materials (BOM)
50 components, 46 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MC34063AP | DIP-8_W7.62mm_LongPads | U1 |
| 1 | NCH6100HV | NCH6100HV | U2 |
| 1 | MPS751 | TO-92_Inline_Wide | Q1 |
| 1 | IRF740 | TO-220-3_Vertical | Q2 |
| 1 | PSU_TUBE | PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 1 | PCB_TUBE | PinHeader_1x06_P2.54mm_Horizontal | J2 |
| 1 | PSU_AMP | PinHeader_1x03_P2.54mm_Horizontal | J3 |
| 1 | AMP | PinHeader_1x03_P2.54mm_Horizontal | J4 |
| 1 | PSU_SIMCAB | PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 1 | SIMCAB | PinHeader_1x03_P2.54mm_Horizontal | J6 |
| 1 | 3PDT | PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | 250k log | Potentiometer_Omeg_PC16BU_Vertical | Bass1 |
| 1 | Barrel_Jack | BarrelJack_Horizontal | DC1 |
| 1 | 1M log | Potentiometer_Omeg_PC16BU_Vertical | Gain1 |
| 1 | Input | Jack_6.35mm_Neutrik_NMJ4HCD2_Horizontal | Input1 |
| 1 | 100k log | Potentiometer_Omeg_PC16BU_Vertical | Mid1 |
| 1 | Out | Jack_3.5mm_Neutrik_NMJ6HCD2_Horizontal | Ouput1 |
| 1 | HP | Jack_6.35mm_Neutrik_NMJ4HCD2_Horizontal | Ouput2 |
| 1 | Boost | SW_CK_Lever_DPDT_72xx | SW1 |
| 1 | SIMCAB | SW_CK_Lever_DPDT_72xx | SW2 |
Show 26 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 50k lin | Potentiometer_Omeg_PC16BU_Vertical | Sweep1 |
| 1 | 250k lin | Potentiometer_Omeg_PC16BU_Vertical | Treble1 |
| 1 | 1k | Potentiometer_Omeg_PC16BU_Vertical | Volume1 |
| 1 | 1N4007 | D_DO-41_SOD81_P7.62mm_Horizontal | D1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | BYV26 | D_DO-15_P10.16mm_Horizontal | D3 |
| 1 | 220µH/1.5A | L_Radial_D10.5mm_P5.00mm_MuRATA_1200RS | L1 |
| 1 | 250pF | C_Disc_D7.5mm_W5.0mm_P7.50mm | C2 |
| 1 | 100nF | C_Rect_L13.0mm_W5.0mm_P7.5mm_or_P10.00mm_FKS3_FKP3_MKS4 | C3 |
| 1 | 47nF | C_Rect_L13.0mm_W5.0mm_P7.5mm_or_P10.00mm_FKS3_FKP3_MKS4 | C4 |
| 1 | 22µF/25V | CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | 470µ | CP_Radial_D10.0mm_P5.00mm | C11 |
| 3 | 100n | C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C12, C13, C15 |
| 1 | 470p | C_Disc_D6.0mm_W4.4mm_P5.00mm | C14 |
| 1 | 10n/400V | C_Disc_D6.0mm_W4.4mm_P5.00mm | C16 |
| 1 | 4.7µ/400V | CP_Radial_D10.0mm_P5.00mm | C17 |
| 1 | 1M | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 15k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R21 |
| 1 | 100R/2W | R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal | R18 |
| 2 | 330R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R19, R20 |
| 1 | 0.22R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R22 |
| 1 | 1.8k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R23 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24 |
| 1 | 430k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R25 |
Pream G5 with Pistortion System design files
The KiCad project lives in the McColson/Stompbox-G5 repository on GitHub; these links point at the commit this page was built from.
Pream G5 with Pistortion System: common questions
How big is the Pream G5 with Pistortion System PCB?
The Pream G5 with Pistortion System measures 165 × 58 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pream G5 with Pistortion System?
50 components, from 46 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pream G5 with Pistortion System design files?
From the McColson/Stompbox-G5 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pream G5 with Pistortion System design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in Stompbox-G5
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687