Timer
MCiuzelis·LituanicaX_AutonomousCarPlatform·CAD/Timer/Kicad/Timer.kicad_pcb
About the Timer PCB
Timer is an open source ESP32 PCB design by MCiuzelis, published on GitHub. It is a 2-layer board measuring 47.4 × 42.8 mm, with 20 components from 12 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the LMZ31707RVQR, MCP3202T-CI/SN and TMF8801-1BM. By type, the board carries 7 capacitors, 5 resistors, 4 ICs, 3 connectors and 1 inductor.
It belongs with the robotics & motion designs in this gallery.
From the project
Mechanical and electrical design files for the LituanicaX autonomous RC car: a Raspberry Pi 5–based robot that navigates a cone-track circuit using a depth camera.
Mechanical and electrical design files for the LituanicaX autonomous RC car: a Raspberry Pi 5–based robot that navigates a cone-track circuit using a depth camera.
This branch of the repository contains only the CAD. The RL training pipeline (Isaac Lab) and the Raspberry Pi deployment code were removed from the tree but are fully preserved in git history — check out any commit before the "CAD-only" commit to get them back.
Main components on the Timer
Timer bill of materials (BOM)
20 components, 12 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMZ31707RVQR AP63203WU-7 | AP63203WU-7_DIO | U1 |
| 1 | ESP32-S3-WROOM-1-N8 | ESP32-S3-WROOM-1_EXP | U2 |
| 1 | MCP3202T-CI/SN THVD1429DT | D8_TEX | U3 |
| 1 | TMF8801-1BM | TMF8801-1BM_AMS | U4 |
| 2 | RJ45 | RJ45_Amphenol_RJHSE538X | J1, J2 |
| 1 | GSB1C912140FSHR | AMPHENOL_GSB1C912140FSHR | J4 |
| 1 | 3.9u | L_1210_3225Metric_Pad1.42x2.65mm_HandSolder | L1 |
| 2 | APXG160ARA561MJ80G 10u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C4 |
| 1 | 100NF 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 1UF 10u | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C3 |
| 3 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7 |
| 5 | 5.1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5 |
Timer design files
The KiCad project lives in the MCiuzelis/LituanicaX_AutonomousCarPlatform repository on GitHub; these links point at the commit this page was built from.
Timer: common questions
What microcontroller does the Timer use?
The Timer is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.
How big is the Timer PCB?
The Timer measures 47.4 × 42.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Timer?
20 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Timer design files?
From the MCiuzelis/LituanicaX_AutonomousCarPlatform repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Timer design in my own project?
The repository has no license, so all rights stay with MCiuzelis. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Timer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in LituanicaX_AutonomousCarPlatform
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k