HardLabs

Palm hub v2 021424

Medical-Robotics-Limbo·Electrical·Projects/Palm_Hub/palmhub_kicad_v2/palm hub v2 021424.kicad_pcb

This repository ships a schematic but no board layout.

About the Palm hub v2 021424 PCB

Palm hub v2 021424 is an open source RP2040/RP2350 PCB design by Medical-Robotics-Limbo, published on GitHub. It is a 2-layer board, with 27 components from 10 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. Other key parts include the adc108s and LP2950-3.0_TO92. By type, the board carries 14 capacitors, 9 resistors, 3 ICs and 1 connector.

Main components on the Palm hub v2 021424

adc108sPicoLP2950-3.0_TO92

Palm hub v2 021424 bill of materials (BOM)

27 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
adc108s
U1
1
Pico
U2
1
LP2950-3.0_TO92
U3
1
Conn_01x08_Male
J1
8
1nf
C1, C2, C3, C4, C5, C6, C7, C8
4
0.1uf
C9, C10, C11, C14
1
1uf
C12
1
0.1uf
C13
8
22
R1, R2, R3, R4, R5, R6, R7, R8
1
51
R9

Palm hub v2 021424 design files

The KiCad project lives in the Medical-Robotics-Limbo/Electrical repository on GitHub; these links point at the commit this page was built from.

Palm hub v2 021424: common questions

What microcontroller does the Palm hub v2 021424 use?

The Palm hub v2 021424 is built around the Pico, from the RP2040/RP2350 family.

How big is the Palm hub v2 021424 PCB?

The Palm hub v2 021424 has 2 copper layers and is 1.6 mm thick.

How many components are on the Palm hub v2 021424?

27 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Palm hub v2 021424 design files?

From the Medical-Robotics-Limbo/Electrical repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Palm hub v2 021424 design in my own project?

The repository has no license, so all rights stay with Medical-Robotics-Limbo. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Palm hub v2 021424 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Electrical

Similar boards