Buck
Mehmet-Emre-Dogan·EE463_2022_TermProject·pcbDesigns/buck/buck/buck.kicad_pcb
About the Buck PCB
Buck is an open source PCB design by Mehmet-Emre-Dogan, published on GitHub. It is a 2-layer board measuring 85 × 105 mm, with 15 components from 15 distinct parts.
Other key parts include the TLP250. By type, the board carries 6 connectors, 2 capacitors, 2 resistors, 1 IC, 1 transistor and 1 fuse.
It belongs with the power & battery designs in this gallery.
From the project
EE463 Term Project
https://medogan.com/testserverdemo/463espwebdemo.html ## IP Scanning ## Controller
IRFP460 was not used in the project because it is not supplied by the University and its is expensive and we've left only one. [We had 2 but we burned one of them.] IXGH24N60C4D1 N Channel IGBT was used due to it is supplied by the University .

Main components on the Buck
Buck bill of materials (BOM)
15 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TLP250 | DIP-8_W7.62mm | U1 |
| 1 | IXGH24N60C4D1 | TO-247-3_Vertical | Q1 |
| 1 | GND | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | 5V | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ESP_CONNECTOR | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | RECTIFIER_IN | TerminalBlock_MetzConnect_Type175_RT02702HBLC_1x02_P7.50mm_Horizontal | J4 |
| 1 | PWM_OUT | TerminalBlock_MetzConnect_Type175_RT02702HBLC_1x02_P7.50mm_Horizontal | J5 |
| 1 | CURR_SENS | TerminalBlock_MetzConnect_Type175_RT02702HBLC_1x02_P7.50mm_Horizontal | J6 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1 |
| 1 | ROE-0512S | roe0512 | PS1 |
| 1 | DSEI30-06A | TO-247-2_Vertical | D1 |
| 1 | 680u | CP_Radial_D35.0mm_P10.00mm_SnapIn | C1 |
| 1 | 10n | C_Disc_D5.1mm_W3.2mm_P5.00mm | C2 |
| 1 | R_OPTO | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | R_GATE | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2 |
Buck design files
The KiCad project lives in the Mehmet-Emre-Dogan/EE463_2022_TermProject repository on GitHub; these links point at the commit this page was built from.
Buck: common questions
How big is the Buck PCB?
The Buck measures 85 × 105 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buck?
15 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Buck design files?
From the Mehmet-Emre-Dogan/EE463_2022_TermProject repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Buck design in my own project?
The repository has no license, so all rights stay with Mehmet-Emre-Dogan. Use it as a reference, and ask the author before reusing the design.
More boards in EE463_2022_TermProject
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k