Pcb utama
Mervs111·Line-Follower-Racer·hardware/pcb-utama/pcb-utama.kicad_pcb
About the Pcb utama
Pcb utama is an open source ESP32 PCB design by Mervs111, published on GitHub. It is a 2-layer board measuring 100 × 127 mm, with 21 components from 19 distinct parts.
Its main chip is the ESP32 DevKit 30 pin, from the ESP32 family. Other key parts include the TB6612 modul and MP1584 (set 5,0 V). By type, the board carries 6 resistors, 5 connectors, 3 ICs, 3 switches, 1 transistor and 1 buzzer.
From the project
Proyek PCB utama pengganti ltm-main/ (v2, 13/10). Skematik dibuat Claude atas permintaan user, layout (penempatan, routing, DRC) oleh Claude lewat MCP KiCad + FreeRouting. Dibuat 22/10/2026 oleh hardware/tools/genpcbutamaawal.py (sekali jalan; --paksa menimpa .kicadpcb dan .kicad
Proyek PCB utama pengganti ltm-main/ (v2, 13/10). Skematik dibuat Claude atas permintaan user, layout (penempatan, routing, DRC) oleh Claude lewat MCP KiCad + FreeRouting. Dibuat 22/10/2026 oleh hardware/tools/genpcbutamaawal.py (sekali jalan; --paksa menimpa .kicadpcb dan .kicadsch, jadi jangan dijalankan lagi** sesudah user mulai menggambar).
Cek awal: kicad-cli pcb drc 0 error, kicad-cli sch erc 0 error.
Main components on the Pcb utama
Pcb utama bill of materials (BOM)
21 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32 DevKit 30 pin | ESP32_DevKit_30P_W25.4 | U1 |
| 1 | TB6612 modul | TB6612_Module_2x8_W15.24 | U2 |
| 1 | MP1584 (set 5,0 V) | MP1584_Module | U3 |
| 1 | S8050 | TO-92_Inline | Q1 |
| 1 | Baterai (P+/P- BMS) | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Motor kiri + encoder | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J2 |
| 1 | Motor kanan + encoder | JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J3 |
| 1 | OLED 0,96 I2C | PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | Kabel PCB sensor (= J1 sensor) | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J5 |
| 1 | Buzzer aktif 5V | Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Saklar geser | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | Tombol A | SW_PUSH_6mm | SW2 |
| 1 | Tombol B | SW_PUSH_6mm | SW3 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 100uF 16V | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 33k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6 |
Pcb utama design files
The KiCad project lives in the Mervs111/Line-Follower-Racer repository on GitHub; these links point at the commit this page was built from.
Pcb utama: common questions
What microcontroller does the Pcb utama use?
The Pcb utama is built around the ESP32 DevKit 30 pin, from the ESP32 family.
How big is the Pcb utama?
The Pcb utama measures 100 × 127 mm, has 2 copper layers and is 1.69 mm thick.
How many components are on the Pcb utama?
21 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb utama design files?
From the Mervs111/Line-Follower-Racer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pcb utama design in my own project?
The repository has no license, so all rights stay with Mervs111. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pcb utama without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Line-Follower-Racer
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k