Sensor garis
Mervs111·Line-Follower-Racer·hardware/sensor-garis/sensor-garis.kicad_pcb
About the Sensor garis PCB
Sensor garis is an open source PCB design by Mervs111, published on GitHub. It is a 2-layer board measuring 94.4 × 51 mm, with 39 components from 6 distinct parts.
Other key parts include the QRE1113GR and CD74HC4067M. By type, the board carries 24 resistors, 13 ICs, 1 connector and 1 capacitor.
It belongs with the sensors designs in this gallery.
From the project
Starter proyek KiCad dibuat 11/10/2026 dari docs/skematik-v1.md, layout PCB v1-draft menyusul di hari yang sama. PCB utama v2 (13/10/2026): disederhanakan dan ditata ulang supaya gampang diakses untuk edukasi. Format KiCad 7, bisa dibuka KiCad 7, 8, atau 9 (KiCad 8/9 menawarkan u
Starter proyek KiCad dibuat 11/10/2026 dari docs/skematik-v1.md, layout PCB v1-draft menyusul di hari yang sama. PCB utama v2 (13/10/2026): disederhanakan dan ditata ulang supaya gampang diakses untuk edukasi. Format KiCad 7, bisa dibuka KiCad 7, 8, atau 9 (KiCad 8/9 menawarkan upgrade format saat disimpan: pilih Ya).
22/10/2026: PCB sensor v2 hasil generator (16 ITR20001 + MCP23017, ltm-sensor/) sudah usang dan dipindah ke arsip/hardware/. Bagian "PCB sensor v2" di bawah hanya untuk riwayat; generator (tools/) masih menulis ke hardware/ltm-sensor/ kalau dijalankan ulang.
Main components on the Sensor garis
Sensor garis bill of materials (BOM)
39 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | QRE1113GR | OnSemi_CASE100CY | U1, U2, U3, U4, U5, U6, U7, U8 +4 |
| 1 | CD74HC4067M | SOIC-24W_7.5x15.4mm_P1.27mm | U13 |
| 1 | Conn_01x08_Socket | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J1 |
| 1 | 100nf | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 12 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R5, R7, R9, R11, R13, R15 +4 |
| 12 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R6, R8, R10, R12, R14, R16 +4 |
Sensor garis design files
The KiCad project lives in the Mervs111/Line-Follower-Racer repository on GitHub; these links point at the commit this page was built from.
Sensor garis: common questions
How big is the Sensor garis PCB?
The Sensor garis measures 94.4 × 51 mm, has 2 copper layers and is 1.69 mm thick.
How many components are on the Sensor garis?
39 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensor garis design files?
From the Mervs111/Line-Follower-Racer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensor garis design in my own project?
The repository has no license, so all rights stay with Mervs111. Use it as a reference, and ask the author before reusing the design.
More boards in Line-Follower-Racer
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956