Usb c to liion charger
MG-5·usb-c-to-liion-charger
About the Usb c to liion charger PCB
Usb c to liion charger is an open source PCB design by MG-5, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 98 × 42 mm, with 83 components from 55 distinct parts.
Other key parts include the IP2721, LTC4000-QFN and LTC3769-QFN. By type, the board carries 33 resistors, 29 capacitors, 5 diodes, 4 transistors, 3 ICs and 2 connectors.
It belongs with the power & battery designs in this gallery.
From the project
Convert power delivered over USB-C PD to charge 10S/12S Li-Ion battery
Main components on the Usb c to liion charger
Usb c to liion charger bill of materials (BOM)
83 components, 55 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IP2721 | TSSOP-16_4.4x5mm_P0.65mm | U1 |
| 1 | LTC4000-QFN | QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm_ThermalVias | U2 |
| 1 | LTC3769-QFN | WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias | U3 |
| 2 | RSJ250P10 | TO-263-2 | Q1, Q2 |
| 1 | BSC047N08NS3 G | TDSON-8-1 | Q3 |
| 1 | AOD66920 | TO-252-3_TabPin2 | Q4 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | BatteryConnection | AMASS_XT30U-M_1x02_P5.0mm_Vertical | J2 |
| 2 | Fuse | KEYSTONE-FUSE-3557-2 | F1, F2 |
| 2 | SolderJumper_2_Open | SolderJumper-Open_0603 | JP1, JP2 |
| 1 | SW_DPDT_x2 | SW_E-Switch_EG2201_DPDT | SW1 |
| 1 | SW_SPDT | SW_E-Switch_EG1249_SPDT | SW2 |
| 1 | green | LED_0603_1608Metric | D1 |
| 1 | red | LED_0603_1608Metric | D2 |
| 1 | blue | LED_0603_1608Metric | D3 |
| 2 | MBR0580-TP | D_SOD-123 | D4, D5 |
| 1 | XGL6060-223 | L_Coilcraft_XAL6060-XXX | L1 |
| 2 | 1uF 25V | C_0603_1608Metric | C1, C5 |
| 3 | DNP | C_0603_1608Metric | C2, C4, C12 |
| 3 | 100nF | C_0603_1608Metric | C3, C17, C23 |
Show 35 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100nF 25V | C_0603_1608Metric | C6 |
| 1 | 10nF 25V | C_0603_1608Metric | C7 |
| 5 | 10nF | C_0603_1608Metric | C8, C9, C24, C25, C27 |
| 3 | 1uF | C_0603_1608Metric | C10, C11, C22 |
| 1 | 180uF 63V | CP_Radial_D10.0mm_P5.00mm | C13 |
| 3 | 10uF 63V | C_1210_3225Metric | C14, C15, C16 |
| 1 | 470nF 25V | C_0603_1608Metric | C18 |
| 1 | 22uF 25V | C_0805_2012Metric | C19 |
| 1 | 10uF 25V | C_0805_2012Metric | C20 |
| 1 | 10uF | C_0805_2012Metric | C21 |
| 1 | 1nF | C_0603_1608Metric | C26 |
| 1 | 1uF 25V | C_0805_2012Metric | C28 |
| 1 | 100nF 25V | C_0805_2012Metric | C29 |
| 1 | 100k | R_0603_1608Metric | R1 |
| 2 | 5k1 | R_0603_1608Metric | R2, R3 |
| 1 | 330R | R_0603_1608Metric | R4 |
| 2 | 180R | R_0603_1608Metric | R5, R6 |
| 1 | 15k | R_0603_1608Metric | R7 |
| 1 | 10M | R_0603_1608Metric | R8 |
| 2 | 3M3 | R_0603_1608Metric | R9, R10 |
| 2 | 2M4 | R_0603_1608Metric | R11, R12 |
| 3 | 5m | R_0805_2012Metric_4Kelvin | R13, R14, R26 |
| 2 | 91k | R_0603_1608Metric | R15, R16 |
| 2 | 56k | R_0603_1608Metric | R17, R18 |
| 1 | 330k | R_0603_1608Metric | R19 |
| 1 | 200k | R_0603_1608Metric | R20 |
| 2 | 6k8 | R_0603_1608Metric | R21, R22 |
| 1 | 6k49 | R_0603_1608Metric | R23 |
| 2 | 10k | R_0603_1608Metric | R24, R31 |
| 1 | 220k | R_0603_1608Metric | R25 |
| 1 | 1k5 | R_0603_1608Metric | R27 |
| 1 | 68k | R_0603_1608Metric | R28 |
| 1 | 150k | R_0603_1608Metric | R29 |
| 1 | 13k | R_0603_1608Metric | R30 |
| 2 | 0R | R_0603_1608Metric | R32, R33 |
Usb c to liion charger design files
The KiCad project lives in the MG-5/usb-c-to-liion-charger repository on GitHub; these links point at the commit this page was built from.
Usb c to liion charger: common questions
How big is the Usb c to liion charger PCB?
The Usb c to liion charger measures 98 × 42 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb c to liion charger?
83 components, from 55 distinct parts. The full bill of materials is listed on this page.
Where can I download the Usb c to liion charger design files?
From the MG-5/usb-c-to-liion-charger repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Usb c to liion charger design in my own project?
Yes, under the terms of its GPL-3.0 license, which MG-5 chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k