Calhacks-13.0-Smart-Helmet
mgvillafane·Calhacks-13.0-Smart-Helmet·Kicad/Helmet_Navigation.kicad_sch
About the Calhacks-13.0-Smart-Helmet PCB
Calhacks-13.0-Smart-Helmet is an open source ESP32 PCB design by mgvillafane, published on GitHub. It is a board, with 36 components from 23 distinct parts.
Its main chip is the ESP32-S3-DevKitC-1 N16R8, from the ESP32 family. Other key parts include the 5V to 3.0V buck >=1A, LSM6DSOX + LIS3MDL breakout, INMP441 I2S microphone and SN74AHCT125 (5V logic). By type, the board carries 8 resistors, 7 capacitors, 5 ICs, 3 modules, 3 transistors and 3 connectors.
It belongs with the rf & radio, iot & wireless and power & battery designs in this gallery.
From the project
Editable KiCad 8-format self-contained module-wiring schematic with custom embedded symbols. Open HelmetNavigation.kicadsch in KiCad Schematic Editor. The file is a logical wiring harness / module schematic, not a routed PCB or Gerber set. The generated syntax and connections wer
Editable KiCad 8-format self-contained module-wiring schematic with custom embedded symbols. Open HelmetNavigation.kicadsch in KiCad Schematic Editor. The file is a logical wiring harness / module schematic, not a routed PCB or Gerber set. The generated syntax and connections were checked programmatically, but a KiCad GUI import and electrical-rules check were not available in the generation environment. Run ERC and review connections before assembly.
Main components on the Calhacks-13.0-Smart-Helmet
Calhacks-13.0-Smart-Helmet bill of materials (BOM)
36 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-DevKitC-1 N16R8 | U1 | |
| 1 | 5V to 3.0V buck >=1A | U2 | |
| 1 | LSM6DSOX + LIS3MDL breakout | U3 | |
| 1 | INMP441 I2S microphone | U4 | |
| 1 | SN74AHCT125 (5V logic) | U5 | |
| 1 | 3V coin motor - Left | M1 | |
| 1 | 3V coin motor - Front | M2 | |
| 1 | 3V coin motor - Right | M3 | |
| 3 | AO3400A N-MOSFET | Q1, Q2, Q3 | |
| 1 | USB 5V power bank | J1 | |
| 1 | WS2812B x3 - LEFT | J2 | |
| 1 | WS2812B x3 - RIGHT | J3 | |
| 1 | PTC 1.5A hold | F1 | |
| 1 | Power switch 2A+ | SW1 | |
| 1 | MODE / VOICE button | SW2 | |
| 1 | SOS / acknowledge button | SW3 | |
| 3 | 1N5819 flyback | D1, D2, D3 | |
| 3 | 470uF / 10V | C1, C6, C7 | |
| 1 | 220uF / 6.3V | C2 | |
| 3 | 100nF ceramic | C3, C4, C5 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 100R series | R1, R2, R3 | |
| 3 | 100k pull-down | R4, R5, R6 | |
| 2 | 330R data | R7, R8 |
Calhacks-13.0-Smart-Helmet design files
The KiCad project lives in the mgvillafane/Calhacks-13.0-Smart-Helmet repository on GitHub; these links point at the commit this page was built from.
- SchematicKicad/Helmet_Navigation.kicad_sch
Calhacks-13.0-Smart-Helmet: common questions
What microcontroller does the Calhacks-13.0-Smart-Helmet use?
The Calhacks-13.0-Smart-Helmet is built around the ESP32-S3-DevKitC-1 N16R8, from the ESP32 family.
How many components are on the Calhacks-13.0-Smart-Helmet?
36 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Calhacks-13.0-Smart-Helmet design files?
From the mgvillafane/Calhacks-13.0-Smart-Helmet repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Calhacks-13.0-Smart-Helmet design in my own project?
The repository has no license, so all rights stay with mgvillafane. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Calhacks-13.0-Smart-Helmet without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k