Pcb project mh
mhaftarc·pcb_project_mh·plytkamh/plytkamh.kicad_pcb
About the Pcb project mh
Pcb project mh is an open source STM32 PCB design by mhaftarc, published on GitHub. It is a 2-layer board measuring 85 × 60 mm, with 53 components from 29 distinct parts.
Its main chip is the STM32F446RETx, from the STM32 family. Other key parts include the USBLC6-2SC6, LDL1117S33R and BME280. By type, the board carries 18 capacitors, 14 resistors, 6 diodes, 5 connectors, 4 ICs and 2 switches.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
STM32F446 dev board designed in KiCad - 2-layer PCB with USB-C, BME280 and light sensor
PCB project for my PCB design course at university. The goal was to design a full board with a microcontroller, sensors, power supply and headers from scratch in KiCad, and to learn how to actually route a 2-layer board.
The board is based on the STM32F446RET6 (same MCU as on the Nucleo-F446RE I use) and is powered from USB-C.
- STM32F446RET6 (LQFP64) with a 12 MHz crystal - USB-C power input with ESD protection (USBLC6), PTC fuse and a reverse polarity diode - 3.3 V LDO (LDL1117) - BME280 - temperature, humidity and pressure sensor on I2C1 - TEMT6000 - ambient light sensor on the ADC (PA0)…

Main components on the Pcb project mh
Pcb project mh bill of materials (BOM)
53 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | LDL1117S33R | SOT-223 | U2 |
| 1 | STM32F446RETx | LQFP-64_10x10mm_P0.5mm | U3 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | TEMT6000X01 | TRANS_TEMT6000X01 | Q1 |
| 1 | 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | BOOT0 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | COMM | PinHeader_2x10_P2.54mm_Vertical | J4 |
| 1 | ANALOG_GPIO | PinHeader_2x10_P2.54mm_Vertical | J5 |
| 1 | 0.5A | Fuse_1812_4532Metric | F1 |
| 1 | RESET | SW_PUSH_6mm | SW1 |
| 1 | USER | SW_PUSH_6mm | SW2 |
| 1 | SS14 | D_SMA | D1 |
| 1 | Green | LED_0603_1608Metric | D2 |
| 1 | Yellow | LED_0603_1608Metric | D3 |
| 3 | Red | LED_0603_1608Metric | D4, D5, D6 |
| 1 | 600R@100MHz | L_0603_1608Metric | FB1 |
| 4 | 4.7u | C_0603_1608Metric | C1, C2, C4, C9 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 10 | 100n | C_0603_1608Metric | C3, C5, C6, C7, C8, C11, C12, C15 +2 |
| 2 | 1u | C_0603_1608Metric | C10, C17 |
| 2 | 10p | C_0603_1608Metric | C13, C14 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 4 | 10k | R_0603_1608Metric | R3, R4, R8, R13 |
| 2 | 4.7k | R_0603_1608Metric | R5, R6 |
| 1 | 3.3k | R_0603_1608Metric | R7 |
| 4 | 680 | R_0603_1608Metric | R9, R10, R11, R12 |
| 1 | 470 | R_0603_1608Metric | R14 |
Pcb project mh design files
The KiCad project lives in the mhaftarc/pcb_project_mh repository on GitHub; these links point at the commit this page was built from.
- Layoutplytkamh/plytkamh.kicad_pcb
- Schematicplytkamh/plytkamh.kicad_sch
Pcb project mh: common questions
What microcontroller does the Pcb project mh use?
The Pcb project mh is built around the STM32F446RETx, from the STM32 family.
How big is the Pcb project mh?
The Pcb project mh measures 85 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pcb project mh?
53 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pcb project mh design files?
From the mhaftarc/pcb_project_mh repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pcb project mh design in my own project?
The repository has no license, so all rights stay with mhaftarc. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pcb project mh without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k