RoboCloud

miameows·RoboCloud·RoboCloud/RoboCloud.kicad_pcb

RoboCloud PCB layout, top view — open source ESP32 board by miameows

About the RoboCloud PCB

RoboCloud is an open source ESP32 PCB design by miameows, published on GitHub under the MIT license. It is a 2-layer board measuring 77 × 50.1 mm, with 20 components from 15 distinct parts.

Its main chip is the ESP32-S2-WROVER, from the ESP32 family. Other key parts include the TB67H420FTG_EL. By type, the board carries 7 capacitors, 4 resistors, 2 ICs, 2 modules, 2 connectors and 2 diodes.

It belongs with the iot & wireless designs in this gallery.

From the project

2231puppy's Project Stida RoboCloud is an ESP32-S2 robot controller board. It has Wi-Fi courtesy of the ESP32-S2 and can drive 2 4.5A (max) motors. It has a bunch of exposed IO and can handle up to 20V in. It is designed for use with Adafruit's CircuitPython.

2231puppy's Project Stida RoboCloud is an ESP32-S2 robot controller board. It has Wi-Fi courtesy of the ESP32-S2 and can drive 2 4.5A (max) motors. It has a bunch of exposed IO and can handle up to 20V in. It is designed for use with Adafruit's CircuitPython.

Stida was 2231puppy's first robot. While no longer in use, the name lives on in Project Stida, 2231puppy's organization.

Main components on the RoboCloud

TB67H420FTG_ELESP32-S2-WROVER

RoboCloud bill of materials (BOM)

20 components, 15 distinct parts.

QtyPartRefs
1
TB67H420FTG_EL
U1
1
ESP32-S2-WROVER
U2
2
Motor_DC
M1, M2
1
Barrel_Jack
J2
1
USB_C_Receptacle
J3
1
SW_Push
SW1
1
DIODE
D1
1
DIODE
D2
1
270pF
C1
1
100µF
C2
3
0.1µF
C3, C4, C5
1
10µF
C6
1
10μF
C7
1
10kΩ
R1
3
5.1kΩ
R2, R4, R5

RoboCloud design files

The KiCad project lives in the miameows/RoboCloud repository on GitHub; these links point at the commit this page was built from.

RoboCloud: common questions

What microcontroller does the RoboCloud use?

The RoboCloud is built around the ESP32-S2-WROVER, from the ESP32 family.

How big is the RoboCloud PCB?

The RoboCloud measures 77 × 50.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RoboCloud?

20 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the RoboCloud design files?

From the miameows/RoboCloud repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the RoboCloud design in my own project?

Yes, under the terms of its MIT license, which miameows chose for the repository.

Can I test firmware for the RoboCloud without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards