Granola summit wasd
michaelswitzer·granola-summit·PCB/wasd/granola-summit-wasd.kicad_pcb
About the Granola summit wasd PCB
Granola summit wasd is an open source RP2040/RP2350 PCB design by michaelswitzer, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 211 × 105 mm, with 52 components from 19 distinct parts.
Its main chip is the C2040, from the RP2040/RP2350 family. Other key parts include the C5250992, C97521 and C5250994. By type, the board carries 19 switches, 17 capacitors, 6 resistors, 4 ICs, 3 connectors and 1 crystal.
It belongs with the keyboards designs in this gallery.
From the project
The Summit is a button box style arcade controller by Granola Arcade.
The Summit is a button box style arcade controller by Granola Arcade.
You can buy the Summit at https://granola.games
The .step file for the case is optimized for FDM 3D printers. I recommend PLA with at least 15% infill but you can use any material you wish. The case has designed break-away supports that you will remove after printing. It should already be aligned in the correct orientation.

Main components on the Granola summit wasd
Granola summit wasd bill of materials (BOM)
52 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C5250992 AMS1117-3.3_SOT223 | SOT-223-3_TabPin2 | U1 |
| 1 | C97521 W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U2 |
| 1 | C2040 RP2040 | RP2040-QFN-56 | U3 |
| 1 | C5250994 USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | C9002 ABLS-12.000MHZ-B4-T | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 3 | C431535 AudioJack3 | Jack_3.5mm_PJ320D_Horizontal | J1, J2, J3 |
| 1 | C318884 TS-1187A-B-A-B | SW_Push_1P1T_XKB_TS-1187A | SW1 |
| 8 | C5333465 MX_Switch | SW_Hotswap_Kailh_Choc_V1V2_1.00u_reversible | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 9 | C5333465 MX_Switch | SW_Hotswap_Kailh_Choc_V1V2_1.00u_24mm_reversible | SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17 +1 |
| 1 | C5333465 MX_Switch | SW_Hotswap_Kailh_Choc_V1V2_1.00u_30mm_reversible | SW19 |
| 1 | C165948 HRO-TYPE-C-31-M-12 | HRO-TYPE-C-31-M-12-Assembly | USB1 |
| 1 | C42591 USB_A | USB-A-SMD_C42591 | USB2 |
| 3 | C83061 10u | C_0805_2012Metric | C1, C2, C17 |
| 2 | C147436 27p | C_0402_1005Metric | C3, C4 |
| 10 | C361203 100n | C_0402_1005Metric | C5, C6, C7, C9, C11, C12, C13, C14 +2 |
| 2 | C5137485 1u | C_0402_1005Metric | C8, C10 |
| 2 | C105637 1k | C_0402_1005Metric | R1, R4 |
| 2 | C2909343 27 | C_0402_1005Metric | R2, R3 |
| 2 | C25905 5.1k | R_0402_1005Metric | R5, R6 |
Granola summit wasd design files
The KiCad project lives in the michaelswitzer/granola-summit repository on GitHub; these links point at the commit this page was built from.
Granola summit wasd: common questions
What microcontroller does the Granola summit wasd use?
The Granola summit wasd is built around the C2040, from the RP2040/RP2350 family.
How big is the Granola summit wasd PCB?
The Granola summit wasd measures 211 × 105 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Granola summit wasd?
52 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Granola summit wasd design files?
From the michaelswitzer/granola-summit repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Granola summit wasd design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Granola summit wasd without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in granola-summit
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k