Findme-LTE

Miha22·findme-LTE

Findme-LTE PCB layout, top view — open source STM32 board by Miha22

About the Findme-LTE PCB

Findme-LTE is an open source STM32 PCB design by Miha22, published on GitHub under the MIT license. It is a 4-layer board measuring 20.3 × 93.3 mm, with 122 components from 58 distinct parts.

Its main chip is the STM32L433CCT6, from the STM32 family. Other key parts include the TXB0104RGYR, USBLC6-2SC6, LIS2DW12TR, TPRT9013-33GB and TPS563201DDCR. By type, the board carries 49 capacitors, 35 resistors, 10 ICs, 10 diodes, 5 transistors and 4 connectors.

It belongs with the rf & radio designs in this gallery.

From the project

Low power LTE & GNSS anti-theft tracker. Periodic GNSS reports to UDP server over LTE (B3, B20) bands.

This project contains hardware design files, including schematics and PCB layouts created by Deniel. It is shared for educational and personal use purposes only. Commercial use is not permitted without written permission.

The previews of the PCB design and schematic:

Findme-LTE, from the project README
From the project README

Main components on the Findme-LTE

Findme-LTE bill of materials (BOM)

122 components, 58 distinct parts.

QtyPartRefs
1
TXB0104RGYR
U1
1
USBLC6-2SC6
U2
1
LIS2DW12TR
U3
1
STM32L433CCT6
U4
1
TPRT9013-33GB
U5
1
TPS563201DDCR
U6
1
SIM7020E
U7
1
ATGM336H-6N-74
U8
1
AT2659S
U10
1
PE4259-63
U11
4
AO3401A
Q1, Q2, Q3, Q4
1
AO3400A
Q7
1
H31003271C2070CY
Y1
1
SWD
J1
1
SMA
J2
1
SNO-1470
J4
1
S2B-ZR-3.4(LF)(SN)
J5
2
TS-1088-AR02016
BOOT0, NRST1
1
JFC1206-1500FS
F2
1
USB_C_Receptacle_USB2.0_16P
USB1
Show 38 more
QtyPartRefs
1
1N5819WS
D1
1
MM3Z10
D2
2
1N5817WS
D3, D4
1
XL-3216SURC
D5
1
SMF6.0A
D6
1
XL-2012UYC
D8
1
XL-3216UOC
D9
1
XL-2012UBC-A
D10
1
LXES15AAA1-153
D12
1
CBW201209U152T
FB2
1
39n
L1
1
4.7u
L3
1
7.5n
L4
2
15p
C1, C2
16
0.1u
C3, C4, C5, C12, C14, C18, C30, C32 +8
5
1u
C6, C7, C17, C29, C49
1
4.7u
C8
1
0.01u
C9
2
1n
C10, C15
6
0.1u
C13, C19, C20, C21, C24, C36
3
100u
C16, C27, C28
4
10u
C22, C23, C41, C43
2
22u
C25, C26
3
22p
C37, C38, C39
2
0u
C42, C54
1
470p
C50
1
100p
C51
6
100k
R4, R33, R34, R37, R39, R43
3
220
R17, R20, R21
3
100
R22, R58, R59
2
5.1k
R23, R24
11
10k
R29, R32, R35, R36, R38, R41, R42, R46 +3
1
33.2k
R40
2
0
R44, R45
3
22
R49, R50, R51
1
4.7k
R53
1
47k
R54
2
1k
R55, R64

Findme-LTE design files

The KiCad project lives in the Miha22/findme-LTE repository on GitHub; these links point at the commit this page was built from.

Findme-LTE: common questions

What microcontroller does the Findme-LTE use?

The Findme-LTE is built around the STM32L433CCT6, from the STM32 family.

How big is the Findme-LTE PCB?

The Findme-LTE measures 20.3 × 93.3 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Findme-LTE?

122 components, from 58 distinct parts. The full bill of materials is listed on this page.

Where can I download the Findme-LTE design files?

From the Miha22/findme-LTE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Findme-LTE design in my own project?

Yes, under the terms of its MIT license, which Miha22 chose for the repository.

Can I test firmware for the Findme-LTE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards