9 open source boards using the PE4259-63
Real designs built with the PE4259-63, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Shipwrecked
mpkendall
61.8 × 79.6 mm141 parts4LUnlicense17NXP
Vswr meter
F6ITU
65 × 70 mm64 parts4LNo license3ESP32
Slate113-mk1
xeno3dev
96.7 × 67.8 mm609 parts8LCC-BY-NC-4.02STM32
Findme-LTE
Miha22
20.3 × 93.3 mm122 parts4LMIT0- schematic only · 132 parts
AetherArray
DanielMBouyou
132 partsNo license0 - schematic only · 75 partsRP2040/RP2350
Pikkolo mesh stick
LastZactionHero
75 partsNo license0 Board a
ajisrawi
100 × 112 mm190 parts4LNo license1Board a easyeda routed
ajisrawi
100 × 112 mm190 parts4LNo license1Board a routed
ajisrawi
130 × 152 mm190 parts4LNo license1
How designs wire the PE4259-63
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the PE4259-63 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 33 pF).
- The CTRL_4 pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 1 nF).
- The RFC_5 pin has a series capacitor on 3 of 5 designs, most often 39 pF (then 10 pF).
- The RF2_3 pin has a series capacitor on 2 of 5 designs, most often 100 pF (then 470 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 100% | — |
| RF2_3pin 3 | Connected to: Signal 100% |
|
| CTRL_4pin 4 | Connected to: PE4259-63 40% |
|
| RFC_5pin 5 | Connected to: Signal 100% |
|
| VDDpin 6 | Connected to: Signal 60% · 3.3V 40% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Shipwrecked pcb by mpkendall, Vswr meter by F6ITU, Slate113-mk1 by xeno3dev and Board a by ajisrawi.
The PE4259-63 in open source designs
The gallery holds 9 open source boards using the PE4259-63 from 7 GitHub repositories; a typical one measures about 96.7 × 93.3 mm and carries around 141 components.
100% use four copper layers or more, and 22% carry an open source license.
The most starred is Shipwrecked pcb by mpkendall.
Parts used alongside the PE4259-63
Microcontrollers on boards using the PE4259-63
What boards using the PE4259-63 are built for
PE4259-63: common questions
Where can I find a PE4259-63 reference design?
Each of the 9 boards on this page is a real design using the PE4259-63. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the PE4259-63 VDD pin connected?
The VDD pin has a capacitor to GND on 4 of 5 designs, most often 100 nF (then 33 pF). Counted from the KiCad layouts of 5 open source designs using the PE4259-63.
How is the PE4259-63 CTRL_4 pin connected?
The CTRL_4 pin has a capacitor to GND on 3 of 5 designs, most often 100 nF (then 1 nF). Counted from the KiCad layouts of 5 open source designs using the PE4259-63.
How is the PE4259-63 RFC_5 pin connected?
The RFC_5 pin has a series capacitor on 3 of 5 designs, most often 39 pF (then 10 pF). Counted from the KiCad layouts of 5 open source designs using the PE4259-63.
What parts are used alongside the PE4259-63?
The RP2040, SX1262IMLTRT and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the PE4259-63 use?
Most are built on RP2040/RP2350 (2), ESP32 (1), NXP (1) and STM32 (1).
How big is a typical board using the PE4259-63?
The median is 96.7 × 93.3 mm, and 0% are two-layer designs.
What is the most popular open source board using the PE4259-63?
By GitHub stars, Shipwrecked pcb by mpkendall, with 17 stars.
Can I simulate one of these boards using the PE4259-63 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.