9 open source boards using the TXB0104RGYR

Real designs built with the TXB0104RGYR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the TXB0104RGYR

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TXB0104RGYR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCCA pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
  • The VCCB pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 4.7 µF).
  • The OE pin is tied to 1.8V on 8 of 9 designs.
  • The A4 pin is tied to GND on 7 of 9 designs (not connected on 2).
VCCApin 1Connected to: 1.8V 100%
  • Decoupling capacitor on 100% · 100 nF (9), 1 µF (1)
A4pin 5Connected to: GND 78% · not connected 22%
NCpin 6, 9Connected to: Not connected 100%
GNDpin 7, 15, 16, 17, 18, 19Connected to: GND 100%
OEpin 8Connected to: 1.8V 89%
B4pin 10Connected to: GND 78% · not connected 22%
VCCBpin 14Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (10), 4.7 µF (1)

6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bitaxe by skot, BitaxeUltra by bitaxeorg, SN65DSI86 hat by brendena and BitaxeUltra by BennetLeff.

The TXB0104RGYR in open source designs

The gallery holds 9 open source boards using the TXB0104RGYR from 9 GitHub repositories; a typical one measures about 56.5 × 99.8 mm and carries around 86 components.

89% use four copper layers or more, and 67% carry an open source license.

The most starred is Bitaxe by skot.

Microcontrollers on boards using the TXB0104RGYR

TXB0104RGYR: common questions

Where can I find a TXB0104RGYR reference design?

Each of the 9 boards on this page is a real design using the TXB0104RGYR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TXB0104RGYR VCCA pin?

The VCCA pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the TXB0104RGYR.

What decoupling capacitors do designs use on the TXB0104RGYR VCCB pin?

The VCCB pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 9 open source designs using the TXB0104RGYR.

How is the TXB0104RGYR OE pin connected?

The OE pin is tied to 1.8V on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the TXB0104RGYR.

What parts are used alongside the TXB0104RGYR?

The 25MHZ, DS4432U+, EMC2101, ESP32-S3-WROOM-1 and INA260 appear in the most repositories here.

Which microcontrollers do boards using the TXB0104RGYR use?

Most are built on ESP32 (7) and STM32 (1).

How big is a typical board using the TXB0104RGYR?

The median is 56.5 × 99.8 mm, and 11% are two-layer designs.

What is the most popular open source board using the TXB0104RGYR?

By GitHub stars, Bitaxe by skot, with 1,375 stars.

Can I simulate one of these boards using the TXB0104RGYR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part