Diploma Work
About the Diploma Work PCB
Diploma Work is an open source ESP8266 PCB design by MihaelaGadzhalova707, published on GitHub. It is a 2-layer board measuring 57.4 × 108.2 mm, with 40 components from 15 distinct parts.
Its main chip is the NodeMCU1.0(ESP-12E), from the ESP8266 family. Other key parts include the 74HC595. By type, the board carries 17 transistors, 9 resistors, 7 connectors, 4 ICs and 3 capacitors.
Main components on the Diploma Work
Diploma Work bill of materials (BOM)
40 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NodeMCU1.0(ESP-12E) | NodeMCU1.0(12-E) | U1 |
| 3 | 74HC595 | SOIC-16W_5.3x10.2mm_P1.27mm | U2, U3, U4 |
| 1 | IRLML6402 | SC-59 | Q1 |
| 8 | NPN | SOT-23 | Q2, Q3, Q4, Q5, Q11, Q12, Q13, Q14 |
| 8 | IRLML6344 | SC-59 | Q6, Q7, Q8, Q9, Q15, Q16, Q17, Q18 |
| 1 | Power In | TerminalBlock_4Ucon_1x02_P3.50mm_Vertical | J1 |
| 1 | US_01 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J2 |
| 1 | US_02 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J3 |
| 1 | US_03 | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J4 |
| 1 | Valves | Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J5 |
| 1 | Temp_Sensor | Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J6 |
| 1 | Led_Strip | Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical | J7 |
| 3 | 100nF | C_0805_2012Metric | C1, C2, C3 |
| 8 | 1K | R_0805_2012Metric | R1, R2, R3, R4, R6, R7, R8, R9 |
| 1 | 4.7k | R_0805_2012Metric | R5 |
Diploma Work design files
The KiCad project lives in the MihaelaGadzhalova707/Diploma_Work repository on GitHub; these links point at the commit this page was built from.
- Layoutshema/shema.kicad_pcb
Diploma Work: common questions
What microcontroller does the Diploma Work use?
The Diploma Work is built around the NodeMCU1.0(ESP-12E), from the ESP8266 family.
How big is the Diploma Work PCB?
The Diploma Work measures 57.4 × 108.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Diploma Work?
40 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Diploma Work design files?
From the MihaelaGadzhalova707/Diploma_Work repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Diploma Work design in my own project?
The repository has no license, so all rights stay with MihaelaGadzhalova707. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Diploma Work without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398