ESP32-HOME-AUTOMATION

mihirsuthar9978·ESP32-HOME-AUTOMATION-PCB·PCB Layout/esp32 based home automation system.kicad_pcb

ESP32-HOME-AUTOMATION PCB layout, top view — open source ESP32 board by mihirsuthar9978

About the ESP32-HOME-AUTOMATION PCB

ESP32-HOME-AUTOMATION is an open source ESP32 PCB design by mihirsuthar9978, published on GitHub. It is a 2-layer board measuring 83.5 × 85 mm, with 40 components from 13 distinct parts.

Its main chip is the ESP32-C3, from the ESP32 family. Other key parts include the AMS1117-3.3. By type, the board carries 13 resistors, 9 diodes, 4 transistors, 4 connectors, 4 relays and 2 ICs.

It belongs with the iot & wireless designs in this gallery.

Main components on the ESP32-HOME-AUTOMATION

ESP32-HOME-AUTOMATION bill of materials (BOM)

40 components, 13 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
ESP32-C3
U2
4
MMBT2222A
Q1, Q2, Q3, Q4
4
S_T
J2, J3, J4, J5
1
Screw_Terminal_01x02
AC_IN1
1
HLK-PM01
HLK1
4
Relay
K1, K2, K3, K4
1
YELLOW_LED
D1
4
MRA4003T3G
D2, D5, D7, D9
4
LED
D3, D4, D6, D8
2
22uF
C1, C2
1
2K
R1
12
R
R2, R3, R4, R5, R6, R7, R8, R9 +4

ESP32-HOME-AUTOMATION design files

The KiCad project lives in the mihirsuthar9978/ESP32-HOME-AUTOMATION-PCB repository on GitHub; these links point at the commit this page was built from.

ESP32-HOME-AUTOMATION: common questions

What microcontroller does the ESP32-HOME-AUTOMATION use?

The ESP32-HOME-AUTOMATION is built around the ESP32-C3, from the ESP32 family.

How big is the ESP32-HOME-AUTOMATION PCB?

The ESP32-HOME-AUTOMATION measures 83.5 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-HOME-AUTOMATION?

40 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32-HOME-AUTOMATION design files?

From the mihirsuthar9978/ESP32-HOME-AUTOMATION-PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ESP32-HOME-AUTOMATION design in my own project?

The repository has no license, so all rights stay with mihirsuthar9978. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32-HOME-AUTOMATION without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards