Static

mihranrazaa·Static·Kicad/Static.kicad_pcb

About the Static PCB

Static is an open source RP2040/RP2350 PCB design by mihranrazaa, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 21 × 51 mm, with 32 components from 16 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700X-330XXTT and W25Q16JVUXIQ_TR. By type, the board carries 16 capacitors, 7 resistors, 4 connectors, 3 ICs, 1 crystal and 1 switch.

From the project

A RP2040 based development board made by me ofc :). it is an attempt to recreate a pico type board to improve my pcb designing skills.

All the files are available in Kicad folder.

Please refer to the bom.csv in production for all the components

Static, from the project README — From the project README

Main components on the Static

RP2040 MCP1700X-330XXTT W25Q16JVUXIQ_TR

Static bill of materials (BOM)

32 components, 16 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	RP2040	QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm	U1
1	MCP1700X-330XXTT MCP1700x-330xxTT	SOT-23	U2
1	W25Q16JVUXIQ_TR	IC_W25Q16JVUXIQ_TR	U3
1	CRYSTAL_GND24 Crystal_GND24	SMD_2MSB4SI_YXC	Y1
1	CONN_01X03 Conn_01x03	PinHeader_1x03_P2.54mm_Vertical	J2
1	USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P	USB_C_Receptacle_HRO_TYPE-C-31-M-12	J3
2	CONN_01X20 Conn_01x20	PinHeader_1x20_P2.54mm_Vertical	J6, J7
1	SW_Push	SW_TS-1088-AR02016	SW1
2	1UF 1uF	C_0402_1005Metric	C1, C10
10	0.1UF 0.1uF	C_0402_1005Metric	C2, C3, C4, C5, C6, C7, C8, C9 +2
2	10UF 10uF	C_0603_1608Metric	C15, C16
2	33PF 33pF	C_0402_1005Metric	C17, C18
2	27	R_0402_1005Metric	R3, R4
1	10K	R_0402_1005Metric	R5
2	1K	R_0402_1005Metric	R6, R7
2	5.1K	R_0402_1005Metric	R8, R9

Static design files

The KiCad project lives in the mihranrazaa/Static repository on GitHub; these links point at the commit this page was built from.

Static: common questions

What microcontroller does the Static use?

The Static is built around the RP2040, from the RP2040/RP2350 family.

How big is the Static PCB?

The Static measures 21 × 51 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Static?

32 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Static design files?

From the mihranrazaa/Static repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Static design in my own project?

Yes, under the terms of its GPL-3.0 license, which mihranrazaa chose for the repository.

Can I test firmware for the Static without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.