Pd booster null
About the Pd booster null PCB
Pd booster null is an open source PCB design by mikegoelzer, published on GitHub under the Custom license license. It is a 2-layer board measuring 11.9 × 24.6 mm, with 7 components from 6 distinct parts.
Other key parts include the INA211BIDCKT. By type, the board carries 3 resistors, 2 connectors, 1 IC and 1 capacitor.
It belongs with the power & battery, dev boards & breakouts and displays & leds designs in this gallery.
From the project
Kicad files for homebrew hobbyist computer with custom RISC-V CPU
This is the hardware repo for a homebrew "personal computer" designed from scratch down to the logic gate level.
The computer is based on my custom RISC-V CPU core (pipelined, in-order, 5-stage) and has all the common peripherals you'd expect on a PC circa the early-2000s like USB, HDMI, keyboard and mouse, etc.
This repo is focused specifically on the PCBs necessary to build the complete computer.
Main components on the Pd booster null
Pd booster null bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | INA211BIDCKT Texas Instruments | SOT65P210X110-6N | U1 |
| 1 | PH2RA-08-UA 2x4 male 0.1" Hirose Electric Co Ltd | PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | PH1RB-02-UA Hirose Electric Co Ltd | PinHeader_2x01_P2.54mm_Vertical | J2 |
| 1 | CC0805KRX7R9BB104 0.1uF TDK Corporation | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | RC0805FR-075K1L 5.1k 1% YAGEO | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2 |
| 1 | CSNL1206FT2L00 2mΩ 1% 1W | STA_CSNL1206_STP | R3 |
Pd booster null design files
The KiCad project lives in the mikegoelzer/Homebrew-ECP5-SBC repository on GitHub; these links point at the commit this page was built from.
Pd booster null: common questions
How big is the Pd booster null PCB?
The Pd booster null measures 11.9 × 24.6 mm, has 2 copper layers and is 1.6256 mm thick.
How many components are on the Pd booster null?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pd booster null design files?
From the mikegoelzer/Homebrew-ECP5-SBC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pd booster null design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
More boards in Homebrew-ECP5-SBC
Raspberry PiMotherboard
152.4 × 76.2 mm151 parts4LCustom license0
FPGACm
55 × 40 mm101 parts8LCustom license0
Pd booster-16amps
45.6 × 131 mm82 parts4LCustom license0
Xm dvi in
39.9 × 37.2 mm37 parts4LCustom license0
Hat
152.4 × 76.2 mm33 parts2LCustom license0
4xOLED-Rev1
62.1 × 108.1 mm5 parts2LCustom license0
Df40-adapter
43 × 41 mm5 parts2LCustom license0
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k