Md opn2c

Mikejmoffitt·md-opn2c·md-opn2c/md-opn2c.kicad_pcb

Md opn2c PCB layout, top view — open source board by Mikejmoffitt

About the Md opn2c PCB

Md opn2c is an open source PCB design by Mikejmoffitt, published on GitHub. It is a 2-layer board measuring 48.7 × 24 mm, with 35 components from 13 distinct parts.

Other key parts include the TL972IDR and SN74HCT08DR. By type, the board carries 18 resistors, 13 capacitors, 2 ICs and 2 connectors.

It belongs with the audio designs in this gallery.

From the project

Adapter for OPN2C (YM3438) use on Megadrive in place of OPN2 (YM2612).

元々のFM音源(YM2612)を抜いて使用することも可能です。 その場合は3BP)と同じような使い方になります。 その場合でもヘッドホンもラインアウトも利用できます。

メガドラVA0の基板を参考しながら書いたんですが、基本的にすべての初代の基板は互換はずです。

This adapter facilitates the install of a YM3438 (OPN2C) in a Sega Mega Drive or Genesis console. Glue logic is present to solve status read bugs that invoke different behavior between the original YM2612 and the CMOS YM3438. In addition, a mixing and buffering circuit (courtesy of the open source Triple Bypass PCB) to both handle the new YM3438 and also provide clean mixing for other signals. The buffer circuit also has provisions to output audio to the…

Md opn2c, from the project README
From the project README

Main components on the Md opn2c

TL972IDRSN74HCT08DR

Md opn2c bill of materials (BOM)

35 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TL972IDR
TL972
U1
1
SN74HCT08DR
74HCT08
U2
2
PH1-12-UA
Conn_01x12_Pin
J1, J2
2
GRM188R61C106MAALD
10uF/16V
C1, C2
6
EMK107B7105KA-T
1uF/16V
C3, C4, C5, C6, C7, C8
2
C0603C330K4HACTU
33pF/50V
C9, C10
1
860010372001
10uF/16V
C11
2
860020472006
47uF/50V
C12, C13
4
RK73H1JTTD1003F
100k
R8, R9, R22, R23
6
RK73H1JTTD2103F
210k
R10, R11, R12, R13, R14, R15
2
MCT06030D3003BP500
300k
R16, R17
2
SG73P1JTTD3300F
330
R18, R19
4
ERJ-3EKF2103V
10k
R20, R21, R24, R25

Md opn2c design files

The KiCad project lives in the Mikejmoffitt/md-opn2c repository on GitHub; these links point at the commit this page was built from.

Md opn2c: common questions

How big is the Md opn2c PCB?

The Md opn2c measures 48.7 × 24 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Md opn2c?

35 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Md opn2c design files?

From the Mikejmoffitt/md-opn2c repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Md opn2c design in my own project?

The repository has no license, so all rights stay with Mikejmoffitt. Use it as a reference, and ask the author before reusing the design.

Similar boards