9 open source boards using the TL972IDR

Real designs built with the TL972IDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the TL972IDR

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TL972IDR connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT_2_7 pin has a series resistor on 8 of 8 designs, most often 300 kΩ (then 330 Ω).
  • The OUT1_1 pin has a series resistor on 7 of 8 designs, most often 10 kΩ (then 300 kΩ).
  • The - pins have a series resistor on 7 of 8 designs, most often 210 kΩ (then 300 kΩ).
  • The - pins have a series capacitor on 7 of 8 designs, most often 3.3 nF (then 150 pF).
OUT1_1pin 1Connected to: A connector 25%
  • Series resistor on 88% · 10 kΩ (3), 300 kΩ (2), 330 Ω (2)
  • Series capacitor on 63% · 3.3 nF (2), 150 pF (1), 1 nF (1)
-pin 2, 6Connected to: A connector 25%
  • Series resistor on 88% · 210 kΩ (12), 300 kΩ (4), 10 kΩ (4)
  • Series capacitor on 88% · 3.3 nF (4), 150 pF (2), 1 nF (2)
+pin 3, 5Connected to: A connector 25%
  • Capacitor to GND on 38% · 10 µF (4), 100 nF (2)
  • Pull-up to AVCC on 38% · 10 kΩ (4), 1 kΩ (1)
  • Series resistor on 38% · 0 Ω (4), 10 kΩ (1)
V-pin 4Connected to: GND 100%
OUT_2_7pin 7Connected to: A connector 25%
  • Series resistor on 100% · 300 kΩ (2), 330 Ω (2), 10 kΩ (2)
  • Series capacitor on 88% · 3.3 nF (2), 150 pF (1), 1 nF (1)
V+pin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 63% · 100 nF (6), 10 µF (1), 10 nF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Neptune by Board-Folk, Elec3607-lab by phwl, Dodekaedri by e-xla and BIRDS-X-PCB by AlbertaSat.

The TL972IDR in open source designs

The gallery holds 9 open source boards using the TL972IDR from 8 GitHub repositories; a typical one measures about 55.9 × 84.9 mm and carries around 71 components.

78% use four copper layers or more, and 11% carry an open source license.

The most starred is Neptune by Board-Folk.

Microcontrollers on boards using the TL972IDR

What boards using the TL972IDR are built for

TL972IDR: common questions

Where can I find a TL972IDR reference design?

Each of the 9 boards on this page is a real design using the TL972IDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TL972IDR OUT_2_7 pin?

The OUT_2_7 pin has a series resistor on 8 of 8 designs, most often 300 kΩ (then 330 Ω). Counted from the KiCad layouts of 8 open source designs using the TL972IDR.

What resistor goes on the TL972IDR OUT1_1 pin?

The OUT1_1 pin has a series resistor on 7 of 8 designs, most often 10 kΩ (then 300 kΩ). Counted from the KiCad layouts of 8 open source designs using the TL972IDR.

What resistor goes on the TL972IDR - pin?

The - pins have a series resistor on 7 of 8 designs, most often 210 kΩ (then 300 kΩ). Counted from the KiCad layouts of 8 open source designs using the TL972IDR.

What parts are used alongside the TL972IDR?

The BWSMA-KE-P001, LD1117S33TR, Si5351A-B-GT, THS4304DBVT and TS3A5017DR appear in the most repositories here.

Which microcontrollers do boards using the TL972IDR use?

Most are built on STM32 (2) and PIC (1).

How big is a typical board using the TL972IDR?

The median is 55.9 × 84.9 mm, and 22% are two-layer designs.

What is the most popular open source board using the TL972IDR?

By GitHub stars, Neptune by Board-Folk, with 175 stars.

Can I simulate one of these boards using the TL972IDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part