Module-4ch dimmer

MikkoTervala·modular-esp32-dimmer·module-4ch-dimmer/module-4ch-dimmer.kicad_pcb

Module-4ch dimmer layout, top view — open source ESP32 board by MikkoTervala

About the Module-4ch dimmer

Module-4ch dimmer is an open source ESP32 PCB design by MikkoTervala, published on GitHub. It is a 2-layer board measuring 50 × 25 mm, with 19 components from 9 distinct parts.

Its main chip is the AON7524, from the ESP32 family. Other key parts include the R-78E3.3-0.5. By type, the board carries 4 transistors, 4 connectors, 4 resistors, 2 capacitors, 1 IC and 1 diode.

From the project

ESP32 based led dimmer with modular components

Main components on the Module-4ch dimmer

Module-4ch dimmer bill of materials (BOM)

19 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
R-78E3.3-0.5
U1
4
AON7524
Q1, Q2, Q3, Q4
2
CONN_01X06_SOCKET
Conn_01x06_Socket
J1, J2
1
Conn_01x05
J3
1
Conn_01x03
J4
3
JLCPCB tooling hole
H3, H4, H5
1
C191023
1N5819WS 1A 40V
D1
2
C13585
10µf
C1, C2
4
100
R1, R2, R3, R4

Module-4ch dimmer design files

The KiCad project lives in the MikkoTervala/modular-esp32-dimmer repository on GitHub; these links point at the commit this page was built from.

Module-4ch dimmer: common questions

What microcontroller does the Module-4ch dimmer use?

The Module-4ch dimmer is built around the AON7524, from the ESP32 family.

How big is the Module-4ch dimmer?

The Module-4ch dimmer measures 50 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Module-4ch dimmer?

19 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Module-4ch dimmer design files?

From the MikkoTervala/modular-esp32-dimmer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Module-4ch dimmer design in my own project?

The repository has no license, so all rights stay with MikkoTervala. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Module-4ch dimmer without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in modular-esp32-dimmer

Similar boards