Module esp32
MikkoTervala·modular-esp32-dimmer·module-esp32/module-esp32.kicad_pcb
About the Module esp32
Module esp32 is an open source ESP32 PCB design by MikkoTervala, published on GitHub. It is a 2-layer board measuring 50 × 25 mm, with 20 components from 14 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-H4, from the ESP32 family. By type, the board carries 6 resistors, 3 connectors, 3 capacitors, 2 switches, 2 diodes and 1 IC.
From the project
ESP32 based led dimmer with modular components
Main components on the Module esp32
Module esp32 bill of materials (BOM)
20 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02-H4 | MODULE_ESP32-C3-WROOM-02-H4 | U1 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | CONN_TYPE-C-31-M-12 | J1 |
| 2 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P1.27mm_Vertical_SMD_Pin1Right | J2, J3 |
| 3 | JLCPCB tooling hole | JLCPCB tooling hole | H3, H4, H5 |
| 1 | C139797 RESET | SW_SPST_PTS810 | SW1 |
| 1 | C139797 BOOT | SW_SPST_PTS810 | SW2 |
| 1 | C191023 1N5819WS 1A 40V | D_SOD-323 | D1 |
| 1 | C2290 LED White KT-0603W | LED_0603_1608Metric | D2 |
| 1 | C15849 1µF | C_0603_1608Metric | C1 |
| 1 | C21120 C3 220nf | C_0603_1608Metric | C2 |
| 1 | C13585 C4 10µf | C_1206_3216Metric | C3 |
| 3 | 10K 10k | R_0603_1608Metric | R1, R2, R5 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R3, R4 |
| 1 | 2.7K 2.7k | R_0603_1608Metric | R6 |
Module esp32 design files
The KiCad project lives in the MikkoTervala/modular-esp32-dimmer repository on GitHub; these links point at the commit this page was built from.
Module esp32: common questions
What microcontroller does the Module esp32 use?
The Module esp32 is built around the ESP32-C3-WROOM-02-H4, from the ESP32 family.
How big is the Module esp32?
The Module esp32 measures 50 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Module esp32?
20 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Module esp32 design files?
From the MikkoTervala/modular-esp32-dimmer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Module esp32 design in my own project?
The repository has no license, so all rights stay with MikkoTervala. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Module esp32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in modular-esp32-dimmer
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k