Monitor de-Energia
Minga312·Monitor-de-Energia·placa-TAI/placa-TAI.kicad_pcb
About the Monitor de-Energia PCB
Monitor de-Energia is an open source ESP32 PCB design by Minga312, published on GitHub. It is a 2-layer board measuring 97.9 × 60.3 mm, with 27 components from 15 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the LM1117-3.3. By type, the board carries 9 resistors, 6 capacitors, 5 connectors, 3 diodes, 2 ICs and 2 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
PLACA DO TAI 1
Um sistema completo para monitoramento de energia em tempo real, permitindo que você entenda seus gastos, identifique os aparelhos que mais consomem e tome decisões inteligentes para economizar na conta de luz.
Este projeto combina hardware customizado e um aplicativo mobile para oferecer uma solução de ponta a ponta. O coração do sistema é um ESP32 que lê dados de um sensor de corrente não-invasivo e os envia para um aplicativo, onde são traduzidos em informações claras e acionáveis sobre seu consumo e gastos em Reais (R$).
Main components on the Monitor de-Energia
Monitor de-Energia bill of materials (BOM)
27 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | MODULE_ESP32-WROOM-32 | U1 |
| 1 | LM1117-3.3 | TerminalBlock_Philmore_TB133_1x03_P5.00mm_Horizontal | U2 |
| 3 | Screw_Terminal_01x02 | JWT_A3963_1x02_P3.96mm_Vertical | J1, J2, J5 |
| 1 | Conn_01x04_Female | PinSocket_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Male | PinSocket_1x04_P2.54mm_Vertical | J4 |
| 2 | SW_Push | SW_Tactile_Straight_KSL0Axx1LFTR | SW1, SW2 |
| 2 | DIODE | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | LED | LED_D5.0mm_IRBlack | D3 |
| 1 | 10u | CP_Radial_D10.0mm_P7.50mm | C1 |
| 3 | 100n | CP_Radial_D10.0mm_P7.50mm | C2, C5, C6 |
| 2 | 10uF | CP_Radial_D10.0mm_P7.50mm | C3, C4 |
| 1 | 22 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 2 | 475k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 5 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4, R5, R6, R7, R9 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
Monitor de-Energia design files
The KiCad project lives in the Minga312/Monitor-de-Energia repository on GitHub; these links point at the commit this page was built from.
- Layoutplaca-TAI/placa-TAI.kicad_pcb
- Schematicplaca-TAI/placa-TAI.kicad_sch
Monitor de-Energia: common questions
What microcontroller does the Monitor de-Energia use?
The Monitor de-Energia is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Monitor de-Energia PCB?
The Monitor de-Energia measures 97.9 × 60.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Monitor de-Energia?
27 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Monitor de-Energia design files?
From the Minga312/Monitor-de-Energia repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Monitor de-Energia design in my own project?
The repository has no license, so all rights stay with Minga312. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Monitor de-Energia without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k