HardLabs

IPicoV5 Panelized

MiniProjectDIY·iPico·iPicoV5_Panelized/iPicoV5_Panelized.kicad_pcb

IPicoV5 Panelized PCB layout, top view — open source RP2040/RP2350 board by MiniProjectDIY

About the IPicoV5 Panelized PCB

IPicoV5 Panelized is an open source RP2040/RP2350 PCB design by MiniProjectDIY, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 75 × 70 mm, with 38 components from 20 distinct parts.

Its main chip is the RP2350A-QFN60, from the RP2040/RP2350 family. Other key parts include the ZD25WQ32CEIGR, TTP223_SOT23-6 and 662K. By type, the board carries 19 capacitors, 8 resistors, 4 ICs, 3 diodes, 1 crystal and 1 connector.

From the project

RP2350 based UF2 hardware security key

iPico use the same IO as official raspberry pi Pico2 board, just replaced physical push button with capacitive touch button on pcb and change usb connector from female to male.

3d printed case using file from 3D folder,using M1.4 2 heat inserts and M1.45 counter sink screws.

IPicoV5 Panelized, from the project README
From the project README

Main components on the IPicoV5 Panelized

ZD25WQ32CEIGRRP2350A-QFN60TTP223_SOT23-6662K

IPicoV5 Panelized bill of materials (BOM)

38 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ZD25WQ32CEIGR
U1
1
RP2350A-QFN60
U2
1
TTP223_SOT23-6
U4
1
662K
U5
1
ABM8-272-T3
Y1
1
GT-USB-8016A
J1
1
BSMD0402L-020
F1
2
TPESD0402G05V
D1, D2
1
NCD0603B1
D3
1
AOTA-B201610S3R3-101-T
L1
7
C_0402_4.7UF_10V_X5R
C_0402_4.7uF_10V_X5R
C1, C2, C5, C8, C20, C21, C22
1
C_0402_1UF_10V_X5R
C_0402_1uF_10V_X5R
C3
1
C_0402_1PF_50V_C0G
C_0402_1pF_50V_C0G
C4
8
C_0402_100NF_10V_X7R
C_0402_100nF_10V_X7R
C6, C7, C11, C12, C14, C15, C18, C19
2
C_0402_15PF_50V_C0G
C_0402_15pF_50V_C0G
C13, C16
1
R_0402_5.1K_5%
R1
3
R_0402_27_5%
R2, R3, R4
2
R_0402_1K_5%
R5, R6
1
R_0402_470_5%
R7
1
R_0402_33_5%
R10

IPicoV5 Panelized design files

The KiCad project lives in the MiniProjectDIY/iPico repository on GitHub; these links point at the commit this page was built from.

IPicoV5 Panelized: common questions

What microcontroller does the IPicoV5 Panelized use?

The IPicoV5 Panelized is built around the RP2350A-QFN60, from the RP2040/RP2350 family.

How big is the IPicoV5 Panelized PCB?

The IPicoV5 Panelized measures 75 × 70 mm, has 2 copper layers and is 1.2 mm thick.

How many components are on the IPicoV5 Panelized?

38 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the IPicoV5 Panelized design files?

From the MiniProjectDIY/iPico repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the IPicoV5 Panelized design in my own project?

Yes, under the terms of its CC0-1.0 license, which MiniProjectDIY chose for the repository.

Can I test firmware for the IPicoV5 Panelized without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in iPico

Similar boards