7 open source boards using the ZD25WQ32CEIGR
Real designs built with the ZD25WQ32CEIGR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
MINIREX G473
mathieupommery
29 × 33 mm104 parts6LNo license10RP2040/RP2350
IPico V5
MiniProjectDIY
15 × 31 mm38 parts2LCC0-1.05RP2040/RP2350
SuperXBit192
kevinjuszczyk
38.1 × 50.8 mm269 parts6LGPL-3.00Silicon Labs
Lisko
vasya-zh
55.8 × 17.8 mm67 parts4LGPL-3.00RP2040/RP2350
Badge
Las-Vejas
73.5 × 47.5 mm66 parts2LGPL-3.00RP2040/RP2350
IPicoV5 Panelized
MiniProjectDIY
75 × 70 mm38 parts2LCC0-1.05RP2040/RP2350
Radianite uFM
RadianiteComputers
24 × 45 mm62 parts4LNo license0
How designs wire the ZD25WQ32CEIGR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the ZD25WQ32CEIGR connects to, and the resistors, capacitors and other passives placed on it.
- The CS pin has a series resistor on 5 of 6 designs, most often 1 kΩ (then 19.1 kΩ).
- The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 100% |
|
| GNDpin 4 | Connected to: GND 100% | — |
| VCCpin 8 | Connected to: 3.3V 67% · a signal 33% |
|
| EPpin 9 | Connected to: GND 67% · not connected 33% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MINIREX G473 by mathieupommery, IPico V5 by MiniProjectDIY, SuperXBit192 by kevinjuszczyk and Badge by Las-Vejas.
The ZD25WQ32CEIGR in open source designs
The gallery holds 7 open source boards using the ZD25WQ32CEIGR from 6 GitHub repositories; a typical one measures about 38.1 × 45 mm and carries around 66 components.
57% use four copper layers or more, and 71% carry an open source license.
The most starred is MINIREX G473 by mathieupommery.
Parts used alongside the ZD25WQ32CEIGR
Microcontrollers on boards using the ZD25WQ32CEIGR
What boards using the ZD25WQ32CEIGR are built for
ZD25WQ32CEIGR: common questions
Where can I find a ZD25WQ32CEIGR reference design?
Each of the 7 boards on this page is a real design using the ZD25WQ32CEIGR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the ZD25WQ32CEIGR CS pin?
The CS pin has a series resistor on 5 of 6 designs, most often 1 kΩ (then 19.1 kΩ). Counted from the KiCad layouts of 6 open source designs using the ZD25WQ32CEIGR.
What decoupling capacitors do designs use on the ZD25WQ32CEIGR VCC pin?
The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the ZD25WQ32CEIGR.
Which microcontrollers do boards using the ZD25WQ32CEIGR use?
Most are built on RP2040/RP2350 (5), Silicon Labs (1) and STM32 (1).
How big is a typical board using the ZD25WQ32CEIGR?
The median is 38.1 × 45 mm, and 43% are two-layer designs.
What is the most popular open source board using the ZD25WQ32CEIGR?
By GitHub stars, MINIREX G473 by mathieupommery, with 10 stars.
Can I simulate one of these boards using the ZD25WQ32CEIGR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.